AGCO-ALLIS 9455 vs Massey Ferguson MF 3655 (A)

11 material differences · fewer than 12

Tractor one

1994–1999

No measured PTO figure

Tractor two

1990–1995

No measured PTO figure

Which should you choose?

Read our verdict on the 9455 and the MF 3655 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

11 material differences · 5 fields identical or within 5%, which is not counted as material

AGCO-ALLIS 9455 and Massey Ferguson MF 3655 (A), field by field
Field	9455	MF 3655 (A)	Gap
Engine
Engine power, claimed claimed	154.9 hp	153.0 hp	—
Engine declared	DETROIT-DIESEL DT-466	Perkins 1006-6 THR 4	differs
Displacement declared	7.61 L	5.99 L	+27% 9455
Maximum torque declared	487 lb·ft · 660 N·m	400 lb·ft · 542 N·m	+22% 9455
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6–24.9 mph · 30–40 km/h	—
Clutch declared	Oil cooled wet multi disc clutch	Pedal-operated, dry and air-cooled VALEO single-plate clutch	differs
Hydraulics & hitch
Hydraulic centre declared	Closed centre	—	—
Pump flow declared	32.2 gpm · 121.9 L/min	13.4 gpm · 50.6 L/min	+141% 9455
Pressure declared	3,046 psi · 210 bar	2,277–2,350 psi · 157–162 bar	differs
Three-point lift at ends declared	12,088 lb · 5,483 kg	14,110 lb · 6,400 kg	+17% MF 3655 (A)
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	13,856 lb · 6,285 kg	11,817 lb · 5,360 kg	+17% 9455
Maximum permissible mass declared	—	19,842 lb · 9,000 kg	—
Wheelbase declared	123.2 in · 3,129 mm	109.3 in · 2,777 mm	+13% 9455
Length declared	179.5 in · 4,560 mm	183.0 in · 4,649 mm	—
Width declared	88.0 in · 2,235 mm	82.2 in · 2,088 mm	+7% 9455
Height declared	118.9 in · 3,020 mm	114.4 in · 2,905 mm	—
Ground clearance declared	—	16.9 in · 430 mm	—
Fuel tank declared	304.3 qt · 288.0 L	338.1 qt · 320.0 L	+11% MF 3655 (A)

Source

Source