AGCO-ALLIS 9435 vs Massey Ferguson MF 8110 A

9 material differences · fewer than 12

Tractor one

1994–1999

No measured PTO figure

Tractor two

1995–1999

No measured PTO figure

Which should you choose?

Read our verdict on the 9435 and the MF 8110 A → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

9 material differences · 7 fields identical or within 5%, which is not counted as material

AGCO-ALLIS 9435 and Massey Ferguson MF 8110 A, field by field
Field	9435	MF 8110 A	Gap
Engine
Engine power, claimed claimed	135.2 hp	133.3 hp	—
Engine declared	DETROIT-DIESEL DT-466	Perkins 1006.60 THR 2	differs
Displacement declared	7.61 L	5.99 L	+27% 9435
Maximum torque declared	426 lb·ft · 577 N·m	361 lb·ft · 489 N·m	+18% 9435
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6–24.9 mph · 30–40 km/h	—
Clutch declared	Oil-cooled wet multi-disc clutch	pedal-operated dry Valeo double clutch	differs
Hydraulics & hitch
Hydraulic centre declared	Closed centre	—	—
Pump flow declared	31.1 gpm · 117.7 L/min	14.1 gpm · 53.3 L/min	+121% 9435
Pressure declared	3,046 psi · 210 bar	2,901 psi · 200 bar	—
Three-point lift at ends declared	12,088 lb · 5,483 kg	12,434 lb · 5,640 kg	—
Rear PTO speeds declared	540/1000 rpm	540/540E/1000 rpm	differs
Weight & dimensions
Unladen weight declared	13,801 lb · 6,260 kg	11,971 lb · 5,430 kg	+15% 9435
Maximum permissible mass declared	—	25,353 lb · 11,500 kg	—
Wheelbase declared	123.2 in · 3,129 mm	109.3 in · 2,777 mm	+13% 9435
Length declared	179.5 in · 4,560 mm	199.7 in · 5,073 mm	+11% MF 8110 A
Width declared	88.0 in · 2,235 mm	90.8 in · 2,306 mm	—
Height declared	118.9 in · 3,020 mm	115.8 in · 2,941 mm	—
Ground clearance declared	—	17.4 in · 442 mm	—
Fuel tank declared	304.3 qt · 288.0 L	302.2 qt · 286.0 L	—

Source

Source