11 material differences · fewer than 12

Tractor oneAGCO-ALLIS 94351994–1999No measured PTO figureTractor twoDeutz-Fahr DX 6.50 A1983–1990No measured PTO figure

Which should you choose?

Read our verdict on the 9435 and the DX 6.50 A → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

11 material differences · 4 fields identical or within 5%, which is not counted as material

AGCO-ALLIS 9435 and Deutz-Fahr DX 6.50 A, field by field
Field	9435	DX 6.50 A	Gap
Engine
Engine power, claimed claimed	135.2 hp	135.2 hp	—
Engine declared	DETROIT-DIESEL DT-466	KHD BF6L 913.101T	differs
Displacement declared	7.61 L	6.13 L	+24% 9435
Maximum torque declared	426 lb·ft · 577 N·m	375 lb·ft · 508 N·m	+14% 9435
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6–24.9 mph · 30–40 km/h	—
Clutch declared	Oil-cooled wet multi-disc clutch	—	—
Hydraulics & hitch
Hydraulic centre declared	Closed centre	—	—
Pump flow declared	31.1 gpm · 117.7 L/min	15.2 gpm · 57.6 L/min	+104% 9435
Pressure declared	3,046 psi · 210 bar	3,481 psi · 240 bar	+14% DX 6.50 A
Three-point lift, at the coupling points declared	12,088 lb · 5,483 kg	14,330 lb · 6,500 kg	+19% DX 6.50 A
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	13,801 lb · 6,260 kg	12,081 lb · 5,480 kg	+14% 9435
Maximum permissible mass declared	—	17,637 lb · 8,000 kg	—
Wheelbase declared	123.2 in · 3,129 mm	106.4 in · 2,703 mm	+16% 9435
Length declared	179.5 in · 4,560 mm	179.5 in · 4,560 mm	—
Width declared	88.0 in · 2,235 mm	93.3 in · 2,370 mm	+6% DX 6.50 A
Height, over the cab declared	118.9 in · 3,020 mm	109.6 in · 2,785 mm	+8% 9435
Ground clearance declared	—	22.4 in · 570 mm	—
Turning radius, braked declared	—	17.0 ft · 5.17 m	—
Fuel tank declared	304.3 qt · 288.0 L	158.5 qt · 150 L	+92% 9435

Source

Source