AGCO-ALLIS 9435 vs DEUTZ-ALLIS 9130

10 material differences · fewer than 12

Tractor one

1994–1999

No measured PTO figure

Tractor two

1989–1990

No measured PTO figure

Which should you choose?

Read our verdict on the 9435 and the 9130 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

10 material differences · 6 fields identical or within 5%, which is not counted as material

AGCO-ALLIS 9435 and DEUTZ-ALLIS 9130, field by field
Field	9435	9130	Gap
Engine
Engine power, claimed claimed	135.2 hp	135.2 hp	—
Engine declared	DETROIT-DIESEL DT-466	K.H.D. BF6L 913 C-TI	differs
Displacement declared	7.61 L	6.13 L	+24% 9435
Maximum torque declared	426 lb·ft · 577 N·m	—	—
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6 mph · 30 km/h	differs
Clutch declared	Oil-cooled wet multi-disc clutch	Pedal-operated dry Rockford single-disc clutch	differs
Hydraulics & hitch
Hydraulic centre declared	Closed centre	Closed centre	—
Pump flow declared	31.1 gpm · 117.7 L/min	24.0 gpm · 90.7 L/min	+30% 9435
Pressure declared	3,046 psi · 210 bar	3,771 psi · 260 bar	+24% 9130
Three-point lift at ends declared	12,088 lb · 5,483 kg	7,211 lb · 3,271 kg	+68% 9435
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	13,801 lb · 6,260 kg	12,300 lb · 5,579 kg	+12% 9435
Wheelbase declared	123.2 in · 3,129 mm	120.0 in · 3,048 mm	—
Length declared	179.5 in · 4,560 mm	188.0 in · 4,775 mm	—
Width declared	88.0 in · 2,235 mm	96.0 in · 2,438 mm	+9% 9130
Height declared	118.9 in · 3,020 mm	122.0 in · 3,099 mm	—
Ground clearance declared	—	23.0 in · 584 mm	—
Turning radius, braked declared	—	13.4 ft · 4.09 m	—
Fuel tank declared	304.3 qt · 288.0 L	360.3 qt · 341.0 L	+18% 9130

Source

Source