8 material differences · fewer than 12
Tractor oneAGCO-ALLIS 91901991–1992No measured PTO figureTractor twoWHITE 1951990–1992No measured PTO figure
Which should you choose?
Read our verdict on the 9190 and the 195 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
8 material differences · 7 fields identical or within 5%, which is not counted as material
| Field | 9190 | 195 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 193.4 hp | 192.3 hp | — |
| Engine declared | K.H.D. BF6L 513 R-T | CUMMINS CTA 6-830 | differs |
| Displacement declared | 9.57 L | 8.28 L | +16% 9190 |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 18.6 mph · 30 km/h | — |
| Hydraulics & hitch | |||
| Hydraulic centre declared | Closed centre | Open centre | differs |
| Pump flow declared | 28.0 gpm · 105.9 L/min | 22.0 gpm · 83.3 L/min | +27% 9190 |
| Pressure declared | 3,771 psi · 260 bar | — | — |
| Three-point lift, at the coupling points declared | 7,965 lb · 3,613 kg | 7,965 lb · 3,613 kg | — |
| Rear PTO speeds declared | 1000 rpm | 1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 16,601 lb · 7,530 kg | 13,600 lb · 6,169 kg | +22% 9190 |
| Wheelbase declared | 115.0 in · 2,921 mm | 112.0 in · 2,845 mm | — |
| Length declared | 200.0 in · 5,080 mm | 180.0 in · 4,572 mm | +11% 9190 |
| Width declared | 96.0 in · 2,438 mm | 96.0 in · 2,438 mm | — |
| Ground clearance declared | 22.0 in · 559 mm | 23.0 in · 584 mm | — |
| Turning radius, braked declared | 16.6 ft · 5.05 m | 13.0 ft · 3.96 m | +28% 9190 |
| Fuel tank declared | 367.7 qt · 348.0 L | 295.9 qt · 280.0 L | +24% 9190 |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
AGCO-ALLIS 9190 sources
Source
- Source: Traktorenlexikon, “AGCO-Allis 9190”
- Source: Traktorenlexikon, “Deutz-Allis 9170”
WHITE 195 sources
Source
- Source: Traktorenlexikon, “White 195”
- Source: Traktorenlexikon, “White 185”