12 material differences

Tractor oneAGCO-ALLIS 91501991–1992No measured PTO figureTractor twoSteyr 8165 a1986–1993No measured PTO figure

Which should you choose?

Read our verdict on the 9150 and the 8165 a → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

12 material differences · 3 fields identical or within 5%, which is not counted as material

AGCO-ALLIS 9150 and Steyr 8165 a, field by field
Field	9150	8165 a	Gap
Engine
Engine power, claimed claimed	149.9 hp	148.0 hp	—
Engine declared	K.H.D. BF6L 913 C-TI	Steyr WD 612.86	differs
Displacement declared	6.13 L	6.60 L	+8% 8165 a
Maximum torque declared	—	438 lb·ft · 594 N·m	—
Transmission
Top speed declared	18.6 mph · 30 km/h	18.6–24.9 mph · 30–40 km/h	differs
Clutch declared	Pedal-operated dry single-disc clutch, type 14	—	—
Hydraulics & hitch
Hydraulic centre declared	Closed centre	—	—
Pump flow declared	24.0 gpm · 90.7 L/min	13.3 gpm · 50.2 L/min	+81% 9150
Pressure declared	3,771 psi · 260 bar	3,553 psi · 245 bar	+6% 9150
Rear PTO speeds declared	540/1000 rpm	1000 rpm	differs
Weight & dimensions
Unladen weight declared	13,521 lb · 6,133 kg	12,291 lb · 5,575 kg	+10% 9150
Maximum permissible mass declared	—	18,739 lb · 8,500 kg	—
Wheelbase declared	120.0 in · 3,048 mm	107.1 in · 2,720 mm	+12% 9150
Length declared	188.0 in · 4,775 mm	180.0 in · 4,571 mm	—
Width declared	96.0 in · 2,438 mm	98.0 in · 2,490 mm	—
Height, over the cab declared	122.0 in · 3,099 mm	115.0 in · 2,920 mm	+6% 9150
Ground clearance declared	23.0 in · 584 mm	18.7 in · 475 mm	+23% 9150
Turning radius, braked declared	13.4 ft · 4.09 m	15.9 ft · 4.85 m	+19% 8165 a
Fuel tank declared	367.7 qt · 348.0 L	177.5 qt · 168.0 L	+107% 9150

Source

Source