AGCO-ALLIS 9150 vs John Deere 7700 (A)

9 material differences · fewer than 12

Tractor one

1991–1992

No measured PTO figure

Tractor two

1992–1997

No measured PTO figure

Which should you choose?

Read our verdict on the 9150 and the 7700 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

9 material differences · 6 fields identical or within 5%, which is not counted as material

AGCO-ALLIS 9150 and John Deere 7700 (A), field by field
Field	9150	7700 (A)	Gap
Engine
Engine power, claimed claimed	149.9 hp	148.0 hp	—
Engine declared	K.H.D. BF6L 913 C-TI	John Deere 6.076 TRW-31	differs
Displacement declared	6.13 L	7.63 L	+24% 7700 (A)
Maximum torque declared	—	448 lb·ft · 607 N·m	—
Transmission
Top speed declared	18.6 mph · 30 km/h	18.6–24.9 mph · 30–40 km/h	differs
Clutch declared	Pedal-operated dry single-disc clutch, type 14	—	—
Hydraulics & hitch
Hydraulic centre declared	Closed centre	—	—
Hydraulic control declared	—	Load sensing	—
Pump flow declared	24.0 gpm · 90.7 L/min	25.8 gpm · 97.7 L/min	+8% 7700 (A)
Pressure declared	3,771 psi · 260 bar	2,857–3,002 psi · 197–207 bar	differs
Three-point lift at ends declared	7,211 lb · 3,271 kg	12,258 lb · 5,560 kg	+70% 7700 (A)
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	13,521 lb · 6,133 kg	14,352 lb · 6,510 kg	+6% 7700 (A)
Maximum permissible mass declared	—	25,353 lb · 11,500 kg	—
Wheelbase declared	120.0 in · 3,048 mm	110.2 in · 2,800 mm	+9% 9150
Length declared	188.0 in · 4,775 mm	187.2 in · 4,755 mm	—
Width declared	96.0 in · 2,438 mm	96.0 in · 2,438 mm	—
Height declared	122.0 in · 3,099 mm	119.0 in · 3,023 mm	—
Ground clearance declared	23.0 in · 584 mm	20.3 in · 515 mm	+13% 9150
Turning radius, braked declared	13.4 ft · 4.09 m	—	—
Fuel tank declared	367.7 qt · 348.0 L	363.5 qt · 344.0 L	—

Source

Source