9 material differences · fewer than 12

Tractor oneAGCO-ALLIS 91501991–1992No measured PTO figureTractor twoDeutz-Fahr Agrotron 1552003–2004No measured PTO figure

Which should you choose?

Read our verdict on the 9150 and the Agrotron 155 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

9 material differences · 6 fields identical or within 5%, which is not counted as material

AGCO-ALLIS 9150 and Deutz-Fahr Agrotron 155, field by field
Field	9150	Agrotron 155	Gap
Engine
Engine power, claimed claimed	149.9 hp	151.0 hp	—
Engine declared	K.H.D. BF6L 913 C-TI	Deutz BF6M 1013 EC	differs
Displacement declared	6.13 L	7.15 L	+17% Agrotron 155
Maximum torque declared	—	466 lb·ft · 632 N·m	—
Transmission
Top speed declared	18.6 mph · 30 km/h	24.9–31.1 mph · 40–50 km/h	differs
Clutch declared	Pedal-operated dry single-disc clutch, type 14	Hydraulically operated ZF multi-plate wet clutch	differs
Hydraulics & hitch
Hydraulic centre declared	Closed centre	—	—
Pump flow declared	24.0 gpm · 90.7 L/min	21.9 gpm · 83.0 L/min	+9% 9150
Pressure declared	3,771 psi · 260 bar	—	—
Three-point lift, at the coupling points declared	7,211 lb · 3,271 kg	20,371 lb · 9,240 kg	+182% Agrotron 155
Rear PTO speeds declared	540/1000 rpm	540 rpm / 1000 rpm	differs
Weight & dimensions
Unladen weight declared	13,521 lb · 6,133 kg	13,162 lb · 5,970 kg	—
Maximum permissible mass declared	—	22,046 lb · 10,000 kg	—
Wheelbase declared	120.0 in · 3,048 mm	108.9 in · 2,767 mm	+10% 9150
Length declared	188.0 in · 4,775 mm	187.3 in · 4,757 mm	—
Width declared	96.0 in · 2,438 mm	98.4 in · 2,500 mm	—
Height, over the cab declared	122.0 in · 3,099 mm	118.0 in · 2,997 mm	—
Ground clearance declared	23.0 in · 584 mm	22.4 in · 570 mm	—
Turning radius, braked declared	13.4 ft · 4.09 m	—	—
Fuel tank declared	367.7 qt · 348.0 L	322.3 qt · 305 L	+14% 9150

Source

Source