AGCO-ALLIS 9130 vs DEUTZ-ALLIS 9130

1 material differences · fewer than 12

Tractor one

1991–1992

No measured PTO figure

Tractor two

1989–1990

No measured PTO figure

Which should you choose?

Read our verdict on the 9130 and the 9130 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

1 material differences · 17 fields identical or within 5%, which is not counted as material

AGCO-ALLIS 9130 and DEUTZ-ALLIS 9130, field by field
Field	9130	9130	Gap
Engine
Engine power, claimed claimed	135.2 hp	135.2 hp	—
Engine declared	K.H.D. BF6L 913 C-TI	K.H.D. BF6L 913 C-TI	—
Displacement declared	6.13 L	6.13 L	—
Transmission
Top speed declared	18.6 mph · 30 km/h	18.6 mph · 30 km/h	—
Clutch declared	Pedal-operated, dry ROCKFORD single-plate clutch	Pedal-operated dry Rockford single-disc clutch	differs
Hydraulics & hitch
Hydraulic centre declared	Closed centre	Closed centre	—
Pump flow declared	24.0 gpm · 90.7 L/min	24.0 gpm · 90.7 L/min	—
Pressure declared	3,771 psi · 260 bar	3,771 psi · 260 bar	—
Three-point lift at ends declared	7,211 lb · 3,271 kg	7,211 lb · 3,271 kg	—
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	12,300 lb · 5,579 kg	12,300 lb · 5,579 kg	—
Wheelbase declared	120.0 in · 3,048 mm	120.0 in · 3,048 mm	—
Length declared	188.0 in · 4,775 mm	188.0 in · 4,775 mm	—
Width declared	96.0 in · 2,438 mm	96.0 in · 2,438 mm	—
Height declared	122.0 in · 3,099 mm	122.0 in · 3,099 mm	—
Ground clearance declared	23.0 in · 584 mm	23.0 in · 584 mm	—
Turning radius, braked declared	13.4 ft · 4.09 m	13.4 ft · 4.09 m	—
Fuel tank declared	360.3 qt · 341.0 L	360.3 qt · 341.0 L	—

Source

Source