AGCO-ALLIS 9130 or AGCO-ALLIS 9435?
Which should you choose?
The data can’t decide this. Power at the PTO shaft cannot be compared: the 9130 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 9435 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
- The AGCO-ALLIS 9435 suits loader and hydraulic implement work better on this data: 30% (27.0 L/min / 7.1 gpm) more hydraulic flow and 68% (2,212 kg / 4,877 lb) more three-point lift.
Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.
What decides it, question by question?
| Question | 9130 | 9435 | Call |
|---|---|---|---|
| Which puts more power through the PTO shaft? | 100.8 kW (135.2 hp)Traktorenlexikon, “AGCO-Allis 9130” | 100.8 kW (135.2 hp)Traktorenlexikon, “AGCO-Allis 9435” | Not comparableNot comparable on power at the PTO shaft: the 9130 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 9435 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft. |
| Which turns a litre of fuel into more work at the shaft? | — | — | No figureNo call on fuel efficiency at the shaft: no figure on record for the 9130 and the 9435. |
| Which pulls harder at the drawbar? | — | — | No figureNo call on drawbar power: no figure on record for the 9130 and the 9435. |
| Which pumps more oil for implements? | 90.7 L/min (24.0 gpm)Traktorenlexikon, “AGCO-Allis 9130” | 117.7 L/min (31.1 gpm)Traktorenlexikon, “AGCO-Allis 9435” | AheadThe AGCO-ALLIS 9435 has 30% more hydraulic flow (27.0 L/min / 7.1 gpm) than the AGCO-ALLIS 9130 (both pump flow, as stated by the source). |
| Which lifts more on the three-point hitch? | 3,271 kg (7,211 lb)Traktorenlexikon, “AGCO-Allis 9130” | 5,483 kg (12,088 lb)Traktorenlexikon, “AGCO-Allis 9435” | AheadThe AGCO-ALLIS 9435 has 68% more lift (2,212 kg / 4,877 lb) than the AGCO-ALLIS 9130 (both lift at the hitch ends, as stated by the source). |
| Which is heavier, for traction? | 5,579 kg (12,300 lb)Traktorenlexikon, “AGCO-Allis 9130” | 6,260 kg (13,801 lb)Traktorenlexikon, “AGCO-Allis 9435” | Ahead (a fact, not an advantage)The AGCO-ALLIS 9435 is 12% heavier (681 kg / 1,501 lb) than the AGCO-ALLIS 9130 (both unladen weight, as stated by the source). |
| Which may carry more ballast and load? | — | — | No figureNo call on maximum permissible mass: no figure on record for the 9130 and the 9435. |
| Which has the wider choice of gears? | 18Traktorenlexikon, “AGCO-Allis 9130” | 32Traktorenlexikon, “AGCO-Allis 9435” | AheadThe AGCO-ALLIS 9435 has 78% more forward gears (14 gears) than the AGCO-ALLIS 9130 (both forward gears, as stated by the source). |
| Which offers a creeper range? | — | — | No figureNo call on a creeper range: not stated for the 9130 and the 9435. |
| Which is faster on the road? | 30 km/h (18.6 mph)Traktorenlexikon, “AGCO-Allis 9130” | 30 km/h (18.6 mph) to 40 km/h (24.9 mph)Traktorenlexikon, “AGCO-Allis 9435” | EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap. |
| Which offers more PTO speeds? | 540/1000 rpmTraktorenlexikon, “AGCO-Allis 9130” | 540/1000 rpmTraktorenlexikon, “AGCO-Allis 9435” | EvenEven on PTO speeds: the same speeds (540, 1000 rpm). |
| Which PTO runs independently of the ground drive? | independentTraktorenlexikon, “AGCO-Allis 9130” | independentTraktorenlexikon, “AGCO-Allis 9435” | EvenEven on PTO independence: every PTO is independent. |
| Which drives on both axles? | Two-wheel or four-wheel driveTraktorenlexikon, “AGCO-Allis 9130” | Two-wheel or four-wheel driveTraktorenlexikon, “AGCO-Allis 9435” | EvenEven on drive: every machine is available with four-wheel drive. |
| Which is newer, and what about parts? | 1991–1992 | 1994–1999 | EvenSame era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts. |
What does this mean in plain words?
- The AGCO-ALLIS 9435 has 30% more hydraulic flow (27.0 L/min / 7.1 gpm) than the AGCO-ALLIS 9130 (both pump flow, as stated by the source).
- The AGCO-ALLIS 9435 has 68% more lift (2,212 kg / 4,877 lb) than the AGCO-ALLIS 9130 (both lift at the hitch ends, as stated by the source).
- The AGCO-ALLIS 9435 is 12% heavier (681 kg / 1,501 lb) than the AGCO-ALLIS 9130 (both unladen weight, as stated by the source).
- The AGCO-ALLIS 9435 has 78% more forward gears (14 gears) than the AGCO-ALLIS 9130 (both forward gears, as stated by the source).
- Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
- Even on PTO speeds: the same speeds (540, 1000 rpm).
- Even on PTO independence: every PTO is independent.
- Even on drive: every machine is available with four-wheel drive.
- Same era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.
- Not comparable on power at the PTO shaft: the 9130 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 9435 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
- No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, maximum permissible mass and a creeper range.
← Every figure for both machines, side by side, with sources