10 material differences · fewer than 12
Tractor oneAGCO-ALLIS 87851998–1999No measured PTO figureTractor twoNew Holland T 50702009–2012No measured PTO figure
Which should you choose?
Read our verdict on the 8785 and the T 5070 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
10 material differences · 3 fields identical or within 5%, which is not counted as material
| Field | 8785 | T 5070 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 110.5 hp | 111.4 hp | — |
| Engine declared | SISU-DIESEL 666 T | IVECO-NEF F4CE 9484 | differs |
| Displacement declared | 6.59 L | 4.49 L | +47% 8785 |
| Maximum torque declared | — | 347 lb·ft · 471 N·m | — |
| Transmission | |||
| Top speed declared | 18.6–24.9 mph · 30–40 km/h | 18.6–24.9 mph · 30–40 km/h | — |
| Clutch declared | Oil-cooled wet multi-disc clutch | electrohydraulically operated wet multi-plate clutch | differs |
| Hydraulics & hitch | |||
| Hydraulic centre declared | Open centre | — | — |
| Pump flow declared | 28.8 gpm · 109.0 L/min | 17.2 gpm · 65.0 L/min | +68% 8785 |
| Pressure declared | 3,046 psi · 210 bar | 3,336 psi · 230 bar | +10% T 5070 |
| Rear PTO speeds declared | 540/1000 rpm | 540/540E/1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 10,840 lb · 4,917 kg | 9,480 lb · 4,300 kg | +14% 8785 |
| Maximum permissible mass declared | — | 16,314 lb · 7,400 kg | — |
| Wheelbase declared | 112.6 in · 2,860 mm | 92.5 in · 2,350 mm | +22% 8785 |
| Length declared | 176.0 in · 4,470 mm | 162.2 in · 4,120 mm | +8% 8785 |
| Width declared | 88.0 in · 2,235 mm | 84.2 in · 2,138 mm | — |
| Ground clearance declared | — | 19.2 in · 488 mm | — |
| Fuel tank declared | 237.8 qt · 225.0 L | 176.5 qt · 167.0 L | +35% 8785 |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
AGCO-ALLIS 8785 sources
- Source: Traktorenlexikon, “AGCO-Allis 8785”
New Holland T 5070 sources
- Source: Traktorenlexikon, “New Holland T 5070”
- Source: Traktorenlexikon, “New Holland T5060”