AGCO-ALLIS 8785 vs John Deere 3255

10 material differences · fewer than 12

Tractor one

1998–1999

No measured PTO figure

Tractor two

1991–1993

No measured PTO figure

Which should you choose?

Read our verdict on the 8785 and the 3255 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

10 material differences · 5 fields identical or within 5%, which is not counted as material

AGCO-ALLIS 8785 and John Deere 3255, field by field
Field	8785	3255	Gap
Engine
Engine power, claimed claimed	110.5 hp	109.6 hp	—
Engine declared	SISU-DIESEL 666 T	John Deere 6.359 TL-007	differs
Displacement declared	6.59 L	5.88 L	+12% 8785
Maximum torque declared	—	305 lb·ft · 413 N·m	—
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6 mph · 30 km/h	differs
Clutch declared	Oil-cooled wet multi-disc clutch	Pedal-operated dry LuK single-disc clutch	differs
Hydraulics & hitch
Hydraulic centre declared	Open centre	Closed centre	differs
Pump flow declared	28.8 gpm · 109.0 L/min	24.8 gpm · 93.9 L/min	+16% 8785
Pressure declared	3,046 psi · 210 bar	2,321 psi · 160 bar	+31% 8785
Three-point lift at ends declared	9,414 lb · 4,270 kg	—	—
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	10,840 lb · 4,917 kg	11,729 lb · 5,320 kg	+8% 3255
Wheelbase declared	112.6 in · 2,860 mm	101.7 in · 2,582 mm	+11% 8785
Length declared	176.0 in · 4,470 mm	172.0 in · 4,370 mm	—
Width declared	88.0 in · 2,235 mm	90.2 in · 2,290 mm	—
Height declared	109.0 in · 2,769 mm	107.3 in · 2,726 mm	—
Ground clearance declared	—	16.5 in · 420 mm	—
Turning radius, braked declared	—	14.5 ft · 4.41 m	—
Fuel tank declared	237.8 qt · 225.0 L	182.8 qt · 173.0 L	+30% 8785

Source

Source