AGCO-ALLIS 8785 vs Deutz-Fahr AgroStar 6.21

9 material differences · fewer than 12

Tractor one

1998–1999

No measured PTO figure

Tractor two

1992–1993

No measured PTO figure

Which should you choose?

Read our verdict on the 8785 and the AgroStar 6.21 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

9 material differences · 5 fields identical or within 5%, which is not counted as material

AGCO-ALLIS 8785 and Deutz-Fahr AgroStar 6.21, field by field
Field	8785	AgroStar 6.21	Gap
Engine
Engine power, claimed claimed	110.5 hp	111.6 hp	—
Engine declared	SISU-DIESEL 666 T	KHD F6L 913	differs
Displacement declared	6.59 L	6.13 L	+8% 8785
Maximum torque declared	—	285 lb·ft · 387 N·m	—
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6–24.9 mph · 30–40 km/h	—
Clutch declared	Oil-cooled wet multi-disc clutch	Pedal-operated single-disc dry clutch with 330 mm disc diameter	differs
Hydraulics & hitch
Hydraulic centre declared	Open centre	—	—
Pump flow declared	28.8 gpm · 109.0 L/min	14.8 gpm · 56.0 L/min	+95% 8785
Pressure declared	3,046 psi · 210 bar	—	—
Three-point lift at ends declared	9,414 lb · 4,270 kg	14,330 lb · 6,500 kg	+52% AgroStar 6.21
Rear PTO speeds declared	540/1000 rpm	1000 rpm	differs
Weight & dimensions
Unladen weight declared	10,840 lb · 4,917 kg	10,229 lb · 4,640 kg	+6% 8785
Maximum permissible mass declared	—	18,739 lb · 8,500 kg	—
Wheelbase declared	112.6 in · 2,860 mm	107.0 in · 2,718 mm	—
Length declared	176.0 in · 4,470 mm	179.4 in · 4,556 mm	—
Width declared	88.0 in · 2,235 mm	97.2 in · 2,470 mm	+11% AgroStar 6.21
Height declared	109.0 in · 2,769 mm	110.9 in · 2,818 mm	—
Ground clearance declared	—	20.9 in · 530 mm	—
Fuel tank declared	237.8 qt · 225.0 L	179.6 qt · 170 L	+32% 8785

Source

Source