AGCO-ALLIS 8775 vs Deutz-Fahr Agrotron 4.95

6 material differences · fewer than 12

Tractor one

1998–1999

No measured PTO figure

Tractor two

1995–1997

No measured PTO figure

Which should you choose?

Read our verdict on the 8775 and the Agrotron 4.95 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

6 material differences · 7 fields identical or within 5%, which is not counted as material

AGCO-ALLIS 8775 and Deutz-Fahr Agrotron 4.95, field by field
Field	8775	Agrotron 4.95	Gap
Engine
Engine power, claimed claimed	94.7 hp	94.9 hp	—
Engine declared	SISU-DIESEL 666	Deutz BF4M 1012 EC	differs
Displacement declared	—	3.19 L	—
Maximum torque declared	—	263 lb·ft · 356 N·m	—
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6–24.9 mph · 30–40 km/h	—
Clutch declared	Oil-cooled wet multi-disc clutch	—	—
Hydraulics & hitch
Hydraulic centre declared	Open centre	Open centre	—
Pump flow declared	29.8 gpm · 112.8 L/min	17.0 gpm · 64.5 L/min	+75% 8775
Pressure declared	—	2,901 psi · 200 bar	—
Three-point lift at ends declared	7,361 lb · 3,339 kg	13,713 lb · 6,220 kg	+86% Agrotron 4.95
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	9,359 lb · 4,245 kg	9,304 lb · 4,220 kg	—
Maximum permissible mass declared	—	16,535 lb · 7,500 kg	—
Wheelbase declared	112.6 in · 2,860 mm	95.2 in · 2,419 mm	+18% 8775
Length declared	176.0 in · 4,470 mm	157.7 in · 4,005 mm	+12% 8775
Width declared	78.0 in · 1,981 mm	79.1 in · 2,008 mm	—
Height declared	109.0 in · 2,769 mm	108.3 in · 2,750 mm	—
Ground clearance declared	—	19.1 in · 485 mm	—
Fuel tank declared	169.1 qt · 160.0 L	190.2 qt · 180 L	+13% Agrotron 4.95

Source

Source