AGCO-ALLIS 8775 vs Deutz-Fahr Agroplus S 420

9 material differences · fewer than 12

Tractor one

AGCO-ALLIS 8775

1998–1999

No measured PTO figure

Tractor two

Deutz-Fahr Agroplus S 420

from 2009

No measured PTO figure

Which should you choose?

We will not advise between these two machines, because their unladen weight differs by more than 25% (61%); the drive differs (Two-wheel or four-wheel drive; 4WD); they were not built in overlapping years (1998–1999; 2009–2009). The figures below are side by side so you can judge them yourself; each says whether it was measured, claimed or declared by its source.

Field by field

9 material differences · 1 fields identical or within 5%, which is not counted as material

AGCO-ALLIS 8775 and Deutz-Fahr Agroplus S 420, field by field
Field8775Agroplus S 420Gap
Engine
Engine power, claimed claimed94.7 hp94.7 hp
Engine declaredSISU-DIESEL 666Same 1000.4 WTdiffers
Displacement declared4.00 L
Transmission
Top speed declared18.6–24.9 mph · 30–40 km/h24.9 mph · 40 km/hdiffers
Clutch declaredOil-cooled wet multi-disc clutch
Hydraulics & hitch
Hydraulic centre declaredOpen centre
Hydraulic control declaredConstant flow
Pump flow declared29.8 gpm · 112.8 L/min14.3 gpm · 54.0 L/min+109% 8775
Three-point lift at ends declared7,361 lb · 3,339 kg
Rear PTO speeds declared540/1000 rpm540 rpm / 1000 rpmdiffers
Weight & dimensions
Unladen weight declared9,359 lb · 4,245 kg5,798 lb · 2,630 kg+61% 8775
Wheelbase declared112.6 in · 2,860 mm80.9 in · 2,056 mm+39% 8775
Length declared176.0 in · 4,470 mm145.9 in · 3,706 mm+21% 8775
Width declared78.0 in · 1,981 mm
Height declared109.0 in · 2,769 mm90.6 in · 2,300 mm+20% 8775
Ground clearance declared11.0 in · 280 mm
Fuel tank declared169.1 qt · 160.0 L58.1 qt · 55 L+191% 8775

AGCO-ALLIS 8775 sources

Source
  • Source: Traktorenlexikon, “AGCO-Allis 8775”

Deutz-Fahr Agroplus S 420 sources

Source
  • Source: Traktorenlexikon, “Deutz-Fahr Agroplus S 420”
  • Source: Traktorenlexikon, “Deutz-Fahr Agroplus S 410”