5 material differences · fewer than 12
Tractor oneAGCO-ALLIS 87651998–1999No measured PTO figureTractor twoSteyr 9086 (a)1993–1995No measured PTO figure
Which should you choose?
Read our verdict on the 8765 and the 9086 (a) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
5 material differences · 7 fields identical or within 5%, which is not counted as material
| Field | 8765 | 9086 (a) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 84.9 hp | 84.9 hp | — |
| Engine declared | SISU-DIESEL 444 Y | Steyr-MWM WD 401.83 | differs |
| Displacement declared | — | 4.16 L | — |
| Maximum torque declared | — | 242 lb·ft · 328 N·m | — |
| Transmission | |||
| Top speed declared | 18.6–24.9 mph · 30–40 km/h | 18.6–24.9 mph · 30–40 km/h | — |
| Clutch declared | Oil-cooled wet multi-disc clutch | — | — |
| Hydraulics & hitch | |||
| Hydraulic centre declared | Open centre | Open centre | — |
| Pump flow declared | — | 14.1 gpm · 53.3 L/min | — |
| Pressure declared | 3,046 psi · 210 bar | 3,481 psi · 240 bar | +14% 9086 (a) |
| Rear PTO speeds declared | 540/1000 rpm | 390/540/1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 8,616 lb · 3,908 kg | 7,782 lb · 3,530 kg | +11% 8765 |
| Maximum permissible mass declared | — | 14,330 lb · 6,500 kg | — |
| Wheelbase declared | 96.0 in · 2,438 mm | 95.3 in · 2,420 mm | — |
| Length declared | 161.0 in · 4,089 mm | 158.5 in · 4,025 mm | — |
| Width declared | 78.0 in · 1,981 mm | 81.2 in · 2,063 mm | — |
| Height, over the cab declared | 103.0 in · 2,616 mm | 104.7 in · 2,660 mm | — |
| Fuel tank declared | 147.9 qt · 140.0 L | 105.7 qt · 100.0 L | +40% 8765 |
AGCO-ALLIS 8765 sources
Source
- Source: Traktorenlexikon, “AGCO-Allis 8765”
Steyr 9086 (a) sources
Source
- Source: Traktorenlexikon, “Steyr 9086”