AGCO-ALLIS 8765 vs Renault Ceres 340 (A)

6 material differences · fewer than 12

Tractor one

1998–1999

No measured PTO figure

Tractor two

1998–2001

No measured PTO figure

Which should you choose?

Read our verdict on the 8765 and the Ceres 340 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

6 material differences · 6 fields identical or within 5%, which is not counted as material

AGCO-ALLIS 8765 and Renault Ceres 340 (A), field by field
Field	8765	Ceres 340 (A)	Gap
Engine
Engine power, claimed claimed	84.9 hp	83.9 hp	—
Engine declared	SISU-DIESEL 444 Y	JOHN DEERE 4039 TRT 35	differs
Displacement declared	—	3.92 L	—
Maximum torque declared	—	219 lb·ft · 297 N·m	—
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6–24.9 mph · 30–40 km/h	—
Clutch declared	Oil-cooled wet multi-disc clutch	Dry LuK double clutch type 310/330	differs
Hydraulics & hitch
Hydraulic centre declared	Open centre	—	—
Pressure declared	3,046 psi · 210 bar	—	—
Three-point lift at ends declared	5,732 lb · 2,600 kg	11,486 lb · 5,210 kg	+100% Ceres 340 (A)
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	8,616 lb · 3,908 kg	7,793 lb · 3,535 kg	+11% 8765
Maximum permissible mass declared	—	12,644 lb · 5,735 kg	—
Wheelbase declared	96.0 in · 2,438 mm	97.2 in · 2,470 mm	—
Length declared	161.0 in · 4,089 mm	168.5 in · 4,280 mm	—
Width declared	78.0 in · 1,981 mm	83.1 in · 2,110 mm	+7% Ceres 340 (A)
Height declared	103.0 in · 2,616 mm	108.7 in · 2,760 mm	+6% Ceres 340 (A)
Ground clearance declared	—	19.3 in · 490 mm	—
Turning radius, braked declared	—	13.6 ft · 4.15 m	—
Fuel tank declared	147.9 qt · 140.0 L	147.9 qt · 140.0 L	—

Source

Source