5 material differences · fewer than 12
Tractor oneAGCO-ALLIS 87651998–1999No measured PTO figureTractor twoDeutz-Fahr Agrolux 902000–2005No measured PTO figure
Which should you choose?
Read our verdict on the 8765 and the Agrolux 90 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
5 material differences · 5 fields identical or within 5%, which is not counted as material
| Field | 8765 | Agrolux 90 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 84.9 hp | 86 hp | — |
| Engine declared | SISU-DIESEL 444 Y | KHD F4L 913 T | differs |
| Displacement declared | — | 4.09 L | — |
| Maximum torque declared | — | 228 lb·ft · 309 N·m | — |
| Transmission | |||
| Top speed declared | 18.6–24.9 mph · 30–40 km/h | 18.6–24.9 mph · 30–40 km/h | — |
| Clutch declared | Oil-cooled wet multi-disc clutch | — | — |
| Hydraulics & hitch | |||
| Hydraulic centre declared | Open centre | Open centre | — |
| Pump flow declared | — | 9.5 gpm · 36.0 L/min | — |
| Pressure declared | 3,046 psi · 210 bar | — | — |
| Rear PTO speeds declared | 540/1000 rpm | 540 rpm / 1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 8,616 lb · 3,908 kg | 6,195 lb · 2,810 kg | +39% 8765 |
| Maximum permissible mass declared | — | 11,023 lb · 5,000 kg | — |
| Wheelbase declared | 96.0 in · 2,438 mm | 92.5 in · 2,350 mm | — |
| Length declared | 161.0 in · 4,089 mm | 151.4 in · 3,845 mm | +6% 8765 |
| Width declared | 78.0 in · 1,981 mm | 81.1 in · 2,060 mm | — |
| Ground clearance declared | — | 17.7 in · 450 mm | — |
| Fuel tank declared | 147.9 qt · 140.0 L | 79.3 qt · 75 L | +87% 8765 |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
AGCO-ALLIS 8765 sources
- Source: Traktorenlexikon, “AGCO-Allis 8765”
Deutz-Fahr Agrolux 90 sources
- Source: Traktorenlexikon, “Deutz-Fahr Agrolux 90”