AGCO-ALLIS 8765 vs Case-Steyr M 9086 a
6 material differences · fewer than 12
Which should you choose?
Read our verdict on the 8765 and the M 9086 a → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
6 material differences · 6 fields identical or within 5%, which is not counted as material
| Field | 8765 | M 9086 a | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 84.9 hp | 84.9 hp | — |
| Engine declared | SISU-DIESEL 444 Y | Steyr-MWM WD 401.83 | differs |
| Displacement declared | — | 4.16 L | — |
| Transmission | |||
| Top speed declared | 18.6–24.9 mph · 30–40 km/h | 18.6–24.9 mph · 30–40 km/h | — |
| Clutch declared | Oil-cooled wet multi-disc clutch | Dry double clutch with pedal-operated driving clutch and hand lever-operated PTO clutch | differs |
| Hydraulics & hitch | |||
| Hydraulic centre declared | Open centre | — | — |
| Pressure declared | 3,046 psi · 210 bar | — | — |
| Three-point lift at ends declared | 5,732 lb · 2,600 kg | 9,480 lb · 4,300 kg | +65% M 9086 a |
| Rear PTO speeds declared | 540/1000 rpm | 430/540/1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 8,616 lb · 3,908 kg | 8,708 lb · 3,950 kg | — |
| Maximum permissible mass declared | — | 14,330 lb · 6,500 kg | — |
| Wheelbase declared | 96.0 in · 2,438 mm | 97.7 in · 2,481 mm | — |
| Length declared | 161.0 in · 4,089 mm | 165.9 in · 4,215 mm | — |
| Width declared | 78.0 in · 1,981 mm | 85.4 in · 2,170 mm | +10% M 9086 a |
| Height declared | 103.0 in · 2,616 mm | 100.4 in · 2,550 mm | — |
| Ground clearance declared | — | 16.9 in · 430 mm | — |
| Turning radius, braked declared | — | 14.1 ft · 4.30 m | — |
| Fuel tank declared | 147.9 qt · 140.0 L | 105.7 qt · 100.0 L | +40% 8765 |
AGCO-ALLIS 8765 sources
Source
- Source: Traktorenlexikon, “AGCO-Allis 8765”
Case-Steyr M 9086 a sources
Source
- Source: Traktorenlexikon, “Steyr M 9086 a”
- Source: Traktorenlexikon, “Steyr 9086”