AGCO-ALLIS 8745 vs John Deere 2300 (A)
9 material differences · fewer than 12
Which should you choose?
Read our verdict on the 8745 and the 2300 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
9 material differences · 5 fields identical or within 5%, which is not counted as material
| Field | 8745 | 2300 (A) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 69.1 hp | 69.1 hp | — |
| Engine declared | CUMMINS B 3.9 T | ZETOR 7701 | differs |
| Displacement declared | 3.93 L | 3.92 L | — |
| Maximum torque declared | — | 182 lb·ft · 247 N·m | — |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 18.6 mph · 30 km/h | — |
| Clutch declared | oil-cooled wet multi-plate clutch | — | — |
| Hydraulics & hitch | |||
| Hydraulic centre declared | Open centre | — | — |
| Pump flow declared | 17.5 gpm · 66.2 L/min | 10.6 gpm · 40.2 L/min | +65% 8745 |
| Pressure declared | 3,046 psi · 210 bar | 1,160 psi · 80 bar | +163% 8745 |
| Three-point lift at ends declared | 5,732 lb · 2,600 kg | 8,885 lb · 4,030 kg | +55% 2300 (A) |
| Rear PTO speeds declared | 540/1000 rpm | 540/1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 7,970 lb · 3,615 kg | 7,187 lb · 3,260 kg | +11% 8745 |
| Maximum permissible mass declared | — | 12,346 lb · 5,600 kg | — |
| Wheelbase declared | 98.8 in · 2,510 mm | 88.8 in · 2,256 mm | +11% 8745 |
| Length declared | 161.0 in · 4,089 mm | 148.6 in · 3,775 mm | +8% 8745 |
| Width declared | 78.0 in · 1,981 mm | 73.8 in · 1,875 mm | +6% 8745 |
| Height declared | 103.0 in · 2,616 mm | 104.9 in · 2,665 mm | — |
| Ground clearance declared | — | 16.1 in · 410 mm | — |
| Fuel tank declared | 147.9 qt · 140.0 L | 100.4 qt · 95.0 L | +47% 8745 |
AGCO-ALLIS 8745 sources
Source
- Source: Traktorenlexikon, “AGCO-Allis 8745”
- Source: Traktorenlexikon, “White 6410”
John Deere 2300 (A) sources
Source
- Source: Traktorenlexikon, “John Deere 2300”