12 material differences

Tractor oneAGCO-ALLIS 87451998–1999No measured PTO figureTractor twoHürlimann XN-7071998–2003No measured PTO figure

Which should you choose?

Read our verdict on the 8745 and the XN-707 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

12 material differences · 2 fields identical or within 5%, which is not counted as material

AGCO-ALLIS 8745 and Hürlimann XN-707, field by field
Field	8745	XN-707	Gap
Engine
Engine power, claimed claimed	69.1 hp	69.1 hp	—
Engine declared	CUMMINS B 3.9 T	Hürlimann 1000.3 WT-1	differs
Displacement declared	3.93 L	3.00 L	+31% 8745
Maximum torque declared	—	184 lb·ft · 250 N·m	—
Transmission
Top speed declared	18.6 mph · 30 km/h	24.9 mph · 40 km/h	+33% XN-707
Clutch declared	oil-cooled wet multi-plate clutch	Pedal-operated dry SDF single-disc clutch as driving clutch	differs
Hydraulics & hitch
Hydraulic centre declared	Open centre	—	—
Hydraulic control declared	—	Load sensing	—
Pump flow declared	17.5 gpm · 66.2 L/min	6.6 gpm · 25.0 L/min	+165% 8745
Pressure declared	3,046 psi · 210 bar	3,046 psi · 210 bar	—
Rear PTO speeds declared	540/1000 rpm	540 rpm / 1000 rpm	differs
Weight & dimensions
Unladen weight declared	7,970 lb · 3,615 kg	5,412 lb · 2,455 kg	+47% 8745
Wheelbase declared	98.8 in · 2,510 mm	75.8 in · 1,926 mm	+30% 8745
Length declared	161.0 in · 4,089 mm	135.1 in · 3,431 mm	+19% 8745
Width declared	78.0 in · 1,981 mm	50.8–64.6 in · 1,290–1,640 mm	differs
Height, over the cab declared	103.0 in · 2,616 mm	83.1 in · 2,110 mm	+24% 8745
Ground clearance declared	—	9.1 in · 230 mm	—
Turning radius, braked declared	—	13.4 ft · 4.07 m	—
Fuel tank declared	147.9 qt · 140.0 L	61.3 qt · 58.0 L	+141% 8745

Source

Source