AGCO-ALLIS 8745 vs Deutz-Fahr Agroplus 77

10 material differences · fewer than 12

Tractor one

1998–1999

No measured PTO figure

Tractor two

2006–2009

No measured PTO figure

Which should you choose?

Read our verdict on the 8745 and the Agroplus 77 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

10 material differences · 4 fields identical or within 5%, which is not counted as material

AGCO-ALLIS 8745 and Deutz-Fahr Agroplus 77, field by field
Field	8745	Agroplus 77	Gap
Engine
Engine power, claimed claimed	69.1 hp	69.1 hp	—
Engine declared	CUMMINS B 3.9 T	SLH 1.000.4 W	differs
Displacement declared	3.93 L	4.00 L	—
Maximum torque declared	—	190 lb·ft · 257 N·m	—
Transmission
Top speed declared	18.6 mph · 30 km/h	24.9 mph · 40 km/h	+33% Agroplus 77
Clutch declared	oil-cooled wet multi-plate clutch	—	—
Hydraulics & hitch
Hydraulic centre declared	Open centre	Open centre	—
Pump flow declared	17.5 gpm · 66.2 L/min	14.3 gpm · 54.0 L/min	+23% 8745
Pressure declared	3,046 psi · 210 bar	—	—
Three-point lift at ends declared	5,732 lb · 2,600 kg	6,614 lb · 3,000 kg	+15% Agroplus 77
Rear PTO speeds declared	540/1000 rpm	540 rpm / 1000 rpm	differs
Weight & dimensions
Unladen weight declared	7,970 lb · 3,615 kg	5,952 lb · 2,700 kg	+34% 8745
Maximum permissible mass declared	—	9,921 lb · 4,500 kg	—
Wheelbase declared	98.8 in · 2,510 mm	88.0 in · 2,235 mm	+12% 8745
Length declared	161.0 in · 4,089 mm	140.2 in · 3,560 mm	+15% 8745
Width declared	78.0 in · 1,981 mm	82.7 in · 2,100 mm	+6% Agroplus 77
Height declared	103.0 in · 2,616 mm	102.4 in · 2,600 mm	—
Ground clearance declared	—	17.5 in · 445 mm	—
Fuel tank declared	147.9 qt · 140.0 L	95.1 qt · 90 L	+56% 8745

Source

Source