AGCO-ALLIS 8745 vs Deutz-Fahr Agroplus 70

10 material differences · fewer than 12

Tractor one

1998–1999

No measured PTO figure

Tractor two

1997–2005

No measured PTO figure

Which should you choose?

Read our verdict on the 8745 and the Agroplus 70 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

10 material differences · 5 fields identical or within 5%, which is not counted as material

AGCO-ALLIS 8745 and Deutz-Fahr Agroplus 70, field by field
Field	8745	Agroplus 70	Gap
Engine
Engine power, claimed claimed	69.1 hp	69.1 hp	—
Engine declared	CUMMINS B 3.9 T	KHD F4L 913 or F4L 914	differs
Displacement declared	3.93 L	—	—
Maximum torque declared	—	182 lb·ft · 247 N·m	—
Transmission
Top speed declared	18.6 mph · 30 km/h	24.9 mph · 40 km/h	+33% Agroplus 70
Clutch declared	oil-cooled wet multi-plate clutch	Mechanically operated dry Borg & Beck single clutch	differs
Hydraulics & hitch
Hydraulic centre declared	Open centre	Open centre	—
Pump flow declared	17.5 gpm · 66.2 L/min	11.8 gpm · 44.7 L/min	+48% 8745
Pressure declared	3,046 psi · 210 bar	2,031 psi · 140 bar	+50% 8745
Three-point lift at ends declared	5,732 lb · 2,600 kg	6,393 lb · 2,900 kg	+12% Agroplus 70
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	7,970 lb · 3,615 kg	6,063 lb · 2,750 kg	+31% 8745
Maximum permissible mass declared	—	9,921 lb · 4,500 kg	—
Wheelbase declared	98.8 in · 2,510 mm	88.0 in · 2,235 mm	+12% 8745
Length declared	161.0 in · 4,089 mm	159.8 in · 4,060 mm	—
Width declared	78.0 in · 1,981 mm	79.1 in · 2,008 mm	—
Height declared	103.0 in · 2,616 mm	96.7 in · 2,455 mm	+7% 8745
Ground clearance declared	—	17.5 in · 445 mm	—
Fuel tank declared	147.9 qt · 140.0 L	95.1 qt · 90 L	+56% 8745

Source

Source