12 material differences
Tractor oneAGCO-ALLIS 87451998–1999No measured PTO figureTractor twoDeutz-Fahr Agrolux 672006–2009No measured PTO figure
Which should you choose?
Read our verdict on the 8745 and the Agrolux 67 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
12 material differences · 2 fields identical or within 5%, which is not counted as material
| Field | 8745 | Agrolux 67 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 69.1 hp | 69.1 hp | — |
| Engine declared | CUMMINS B 3.9 T | Same 1000.3 WT | differs |
| Displacement declared | 3.93 L | 3.00 L | +31% 8745 |
| Maximum torque declared | — | 188 lb·ft · 255 N·m | — |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 18.6–24.9 mph · 30–40 km/h | differs |
| Clutch declared | oil-cooled wet multi-plate clutch | Pedal-operated dry Borg & Beck single-disc clutch | differs |
| Hydraulics & hitch | |||
| Hydraulic centre declared | Open centre | Open centre | — |
| Pump flow declared | 17.5 gpm · 66.2 L/min | 9.5 gpm · 36.0 L/min | +84% 8745 |
| Pressure declared | 3,046 psi · 210 bar | — | — |
| Three-point lift, at the coupling points declared | 5,732 lb · 2,600 kg | 6,614 lb · 3,000 kg | +15% Agrolux 67 |
| Rear PTO speeds declared | 540/1000 rpm | 540/540E rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 7,970 lb · 3,615 kg | 4,894 lb · 2,220 kg | +63% 8745 |
| Maximum permissible mass declared | — | 9,480 lb · 4,300 kg | — |
| Wheelbase declared | 98.8 in · 2,510 mm | 83.3 in · 2,115 mm | +19% 8745 |
| Length declared | 161.0 in · 4,089 mm | 145.0 in · 3,682 mm | +11% 8745 |
| Width declared | 78.0 in · 1,981 mm | 85.8 in · 2,180 mm | +10% Agrolux 67 |
| Ground clearance declared | — | 15.0 in · 380 mm | — |
| Fuel tank declared | 147.9 qt · 140.0 L | 56.0 qt · 53 L | +164% 8745 |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
AGCO-ALLIS 8745 sources
Source
- Source: Traktorenlexikon, “AGCO-Allis 8745”
- Source: Traktorenlexikon, “White 6410”
Deutz-Fahr Agrolux 67 sources
Source
- Source: Traktorenlexikon, “Deutz-Fahr Agrolux 67”
- Source: Traktorenlexikon, “Deutz-Fahr Agroplus S 320”