AGCO-ALLIS 8745 or Deutz-Fahr Agrocompakt 70 V/F 4?

Which should you choose?

The data can’t decide this. Power at the PTO shaft cannot be compared: the 8745 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the Agrocompakt 70 V/F 4 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.

  • The AGCO-ALLIS 8745 suits loader and hydraulic implement work better on this data: 41% (19.2 L/min / 5.1 gpm) more hydraulic flow.
  • The Deutz-Fahr Agrocompakt 70 V/F 4 suits road haulage better on this data: 33% (10.0 km/h / 6.2 mph) more top speed.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for AGCO-ALLIS 8745 and Deutz-Fahr Agrocompakt 70 V/F 4, with the call on each
Question8745Agrocompakt 70 V/F 4Call
Which puts more power through the PTO shaft?51.5 kW (69.1 hp)Traktorenlexikon, “AGCO-Allis 8745”51.5 kW (69.1 hp)Traktorenlexikon, “Deutz-Fahr Agrocompact 70”Not comparableNot comparable on power at the PTO shaft: the 8745 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the Agrocompakt 70 V/F 4 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
Which turns a litre of fuel into more work at the shaft?No figureNo call on fuel efficiency at the shaft: no figure on record for the 8745 and the Agrocompakt 70 V/F 4.
Which pulls harder at the drawbar?No figureNo call on drawbar power: no figure on record for the 8745 and the Agrocompakt 70 V/F 4.
Which pumps more oil for implements?66.2 L/min (17.5 gpm)Traktorenlexikon, “AGCO-Allis 8745”47 L/min (12.4 gpm)Traktorenlexikon, “Deutz-Fahr Agrocompact 70”AheadThe AGCO-ALLIS 8745 has 41% more hydraulic flow (19.2 L/min / 5.1 gpm) than the Deutz-Fahr Agrocompakt 70 V/F 4 (both pump flow, as stated by the source).
Which lifts more on the three-point hitch?2,600 kg (5,732 lb)Traktorenlexikon, “AGCO-Allis 8745”2,600 kg (5,732 lb)Traktorenlexikon, “Deutz-Fahr Agrocompact 70”EvenEven on three-point lift (both lift at the hitch ends, as stated by the source): the difference is under the 10% threshold, too small to call.
Which is heavier, for traction?3,615 kg (7,970 lb)Traktorenlexikon, “AGCO-Allis 8745”2,700 kg (5,952 lb) to 2,750 kg (6,063 lb)Traktorenlexikon, “Deutz-Fahr Agrocompact 70”Ahead (a fact, not an advantage)The AGCO-ALLIS 8745 is 31% heavier (865 kg / 1,907 lb) than the Deutz-Fahr Agrocompakt 70 V/F 4 (both unladen weight, as stated by the source).
Which may carry more ballast and load?4,300 kg (9,480 lb)Traktorenlexikon, “Deutz-Fahr Agrocompact 70”No figureNo call on maximum permissible mass: no figure on record for the 8745.
Which has the wider choice of gears?12Traktorenlexikon, “AGCO-Allis 8745”20Traktorenlexikon, “Deutz-Fahr Agrocompact 70”AheadThe Deutz-Fahr Agrocompakt 70 V/F 4 has 67% more forward gears (8 gears) than the AGCO-ALLIS 8745 (both forward gears, as stated by the source).
Which offers a creeper range?No figureNo call on a creeper range: not stated for the 8745 and the Agrocompakt 70 V/F 4.
Which is faster on the road?30 km/h (18.6 mph)Traktorenlexikon, “AGCO-Allis 8745”40 km/h (24.9 mph)Traktorenlexikon, “Deutz-Fahr Agrocompact 70”AheadThe Deutz-Fahr Agrocompakt 70 V/F 4 has 33% more top speed (10.0 km/h / 6.2 mph) than the AGCO-ALLIS 8745 (both top speed forward, as stated by the source).
Which offers more PTO speeds?540/1000 rpmTraktorenlexikon, “AGCO-Allis 8745”540/540E/1000 rpmTraktorenlexikon, “Deutz-Fahr Agrocompact 70”EvenEven on PTO speeds: the same speeds (540, 1000 rpm).
Which PTO runs independently of the ground drive?independentTraktorenlexikon, “AGCO-Allis 8745”No figureNo call on PTO independence: not stated for the Agrocompakt 70 V/F 4.
Which drives on both axles?Two-wheel or four-wheel driveTraktorenlexikon, “AGCO-Allis 8745”4WDTraktorenlexikon, “Deutz-Fahr Agrocompact 70”EvenEven on drive: every machine is available with four-wheel drive.
Which is newer, and what about parts?1998–19991998–2004EvenSame era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The AGCO-ALLIS 8745 has 41% more hydraulic flow (19.2 L/min / 5.1 gpm) than the Deutz-Fahr Agrocompakt 70 V/F 4 (both pump flow, as stated by the source).
  • The AGCO-ALLIS 8745 is 31% heavier (865 kg / 1,907 lb) than the Deutz-Fahr Agrocompakt 70 V/F 4 (both unladen weight, as stated by the source).
  • The Deutz-Fahr Agrocompakt 70 V/F 4 has 67% more forward gears (8 gears) than the AGCO-ALLIS 8745 (both forward gears, as stated by the source).
  • The Deutz-Fahr Agrocompakt 70 V/F 4 has 33% more top speed (10.0 km/h / 6.2 mph) than the AGCO-ALLIS 8745 (both top speed forward, as stated by the source).
  • Even on three-point lift (both lift at the hitch ends, as stated by the source): the difference is under the 10% threshold, too small to call.
  • Even on PTO speeds: the same speeds (540, 1000 rpm).
  • Even on drive: every machine is available with four-wheel drive.
  • Same era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.
  • Not comparable on power at the PTO shaft: the 8745 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the Agrocompakt 70 V/F 4 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, maximum permissible mass, a creeper range and PTO independence.

← Every figure for both machines, side by side, with sources