10 material differences · fewer than 12
Tractor oneAGCO-ALLIS 87451998–1999No measured PTO figureTractor twoDeutz-Fahr Agrocompact 70 V/F 31998–2006No measured PTO figure
Which should you choose?
Read our verdict on the 8745 and the Agrocompact 70 V/F 3 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
10 material differences · 2 fields identical or within 5%, which is not counted as material
| Field | 8745 | Agrocompact 70 V/F 3 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 69.1 hp | 69.1 hp | — |
| Engine declared | CUMMINS B 3.9 T | SLH 1.000.3 WT | differs |
| Displacement declared | 3.93 L | 3.00 L | +31% 8745 |
| Maximum torque declared | — | 192 lb·ft · 260 N·m | — |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 24.9 mph · 40 km/h | +33% Agrocompact 70 V/F 3 |
| Clutch declared | oil-cooled wet multi-plate clutch | — | — |
| Hydraulics & hitch | |||
| Hydraulic centre declared | Open centre | Open centre | — |
| Pump flow declared | 17.5 gpm · 66.2 L/min | — | — |
| Pressure declared | 3,046 psi · 210 bar | — | — |
| Three-point lift, at the coupling points declared | 5,732 lb · 2,600 kg | 6,614 lb · 3,000 kg | +15% Agrocompact 70 V/F 3 |
| Rear PTO speeds declared | 540/1000 rpm | 540/540E/1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 7,970 lb · 3,615 kg | 5,456–5,567 lb · 2,475–2,525 kg | differs |
| Wheelbase declared | 98.8 in · 2,510 mm | 75.8 in · 1,926 mm | +30% 8745 |
| Length declared | 161.0 in · 4,089 mm | 140.8 in · 3,576 mm | +14% 8745 |
| Width declared | 78.0 in · 1,981 mm | 47.2–56.1 in · 1,199–1,425 mm | differs |
| Ground clearance declared | — | 8.3–9.1 in · 210–230 mm | — |
| Fuel tank declared | 147.9 qt · 140.0 L | 74.0 qt · 70 L | +100% 8745 |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
AGCO-ALLIS 8745 sources
- Source: Traktorenlexikon, “AGCO-Allis 8745”
- Source: Traktorenlexikon, “White 6410”
Deutz-Fahr Agrocompact 70 V/F 3 sources
- Source: Traktorenlexikon, “Deutz-Fahr Agrocompact 70 F”
- Source: Traktorenlexikon, “Deutz-Fahr Agroplus 67”