AGCO-ALLIS 8630 vs VALMET 8200

15 material differences

Tractor one

1991–1997

No measured PTO figure

Tractor two

1993–1996

No measured PTO figure

Which should you choose?

Read our verdict on the 8630 and the 8200 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

15 material differences · 3 fields identical or within 5%, which is not counted as material

AGCO-ALLIS 8630 and VALMET 8200, field by field
Field	8630	8200	Gap
Engine
Engine power, claimed claimed	128.2 hp	128.2 hp	—
Engine declared	S.L.H. 1000.6 AT	VALMET 634 D	differs
Displacement declared	6.00 L	7.37 L	+23% 8200
Maximum torque declared	329 lb·ft · 446 N·m	361 lb·ft · 490 N·m	+10% 8200
Transmission
Top speed declared	18.6 mph · 30 km/h	18.6–24.9 mph · 30–40 km/h	differs
Clutch declared	Pedal-operated dry S.L.H. double clutch	Pedal-operated, dry Fichtel & Sachs single-plate clutch	differs
Hydraulics & hitch
Hydraulic centre declared	Open centre	—	—
Pump flow declared	16.2 gpm · 61.2 L/min	17.8 gpm · 67.4 L/min	+10% 8200
Pressure declared	2,176 psi · 150 bar	2,901 psi · 200 bar	+33% 8200
Three-point lift at ends declared	10,939 lb · 4,962 kg	—	—
Rear PTO speeds declared	540/540E/1000E/1000 rpm	540/1000 rpm	differs
Weight & dimensions
Unladen weight declared	11,100 lb · 5,035 kg	10,362 lb · 4,700 kg	+7% 8630
Maximum permissible mass declared	17,857 lb · 8,100 kg	16,535 lb · 7,500 kg	+8% 8630
Wheelbase declared	110.0 in · 2,794 mm	100.7 in · 2,558 mm	+9% 8630
Length declared	183.6 in · 4,663 mm	186.8 in · 4,745 mm	—
Width declared	90.0 in · 2,286 mm	86.6 in · 2,200 mm	—
Height declared	116.2 in · 2,951 mm	108.7 in · 2,760 mm	+7% 8630
Ground clearance declared	20.8 in · 528 mm	18.7 in · 475 mm	+11% 8630
Turning radius, braked declared	12.8 ft · 3.90 m	15.5 ft · 4.71 m	+21% 8200
Fuel tank declared	221.9 qt · 210.0 L	174.4 qt · 165.0 L	+27% 8630

Source

Source