AGCO-ALLIS 8630 or Schlüter Super 1300 TVL-LS?

Which should you choose?

The data can’t decide this. Power at the PTO shaft cannot be compared: the 8630 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the Super 1300 TVL-LS has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.

  • The AGCO-ALLIS 8630 suits loader and hydraulic implement work better on this data: 25% (12.4 L/min / 3.3 gpm) more hydraulic flow.
  • The Schlüter Super 1300 TVL-LS suits road haulage better on this data: 46% (13.7 km/h / 8.5 mph) more top speed.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “similar machines”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for AGCO-ALLIS 8630 and Schlüter Super 1300 TVL-LS, with the call on each
Question8630Super 1300 TVL-LSCall
Which puts more power through the PTO shaft?95.6 kW (128.2 hp)Traktorenlexikon, “AGCO-Allis 8630”95 kW (127 hp)Traktorenlexikon, “Schlüter Super 1300 TVL - LS”Not comparableNot comparable on power at the PTO shaft: the 8630 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the Super 1300 TVL-LS has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
Which turns a litre of fuel into more work at the shaft?No figureNo call on fuel efficiency at the shaft: no figure on record for the 8630 and the Super 1300 TVL-LS.
Which pulls harder at the drawbar?No figureNo call on drawbar power: no figure on record for the 8630 and the Super 1300 TVL-LS.
Which pumps more oil for implements?61.2 L/min (16.2 gpm)Traktorenlexikon, “AGCO-Allis 8630”48.8 L/min (12.9 gpm)Traktorenlexikon, “Schlüter Super 1300 TVL - LS”AheadThe AGCO-ALLIS 8630 has 25% more hydraulic flow (12.4 L/min / 3.3 gpm) than the Schlüter Super 1300 TVL-LS (both pump flow, as stated by the source).
Which lifts more on the three-point hitch?4,962 kg (10,939 lb)Traktorenlexikon, “AGCO-Allis 8630”No figureNo call on three-point lift: no figure on record for the Super 1300 TVL-LS.
Which is heavier, for traction?5,035 kg (11,100 lb)Traktorenlexikon, “AGCO-Allis 8630”6,100 kg (13,448 lb)Traktorenlexikon, “Schlüter Super 1300 TVL - LS”Ahead (a fact, not an advantage)The Schlüter Super 1300 TVL-LS is 21% heavier (1,065 kg / 2,348 lb) than the AGCO-ALLIS 8630 (both unladen weight, as stated by the source).
Which may carry more ballast and load?8,100 kg (17,857 lb)Traktorenlexikon, “AGCO-Allis 8630”No figureNo call on maximum permissible mass: no figure on record for the Super 1300 TVL-LS.
Which has the wider choice of gears?24 to 36Traktorenlexikon, “AGCO-Allis 8630”24Traktorenlexikon, “Schlüter Super 1300 TVL - LS”EvenEven on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers a creeper range?No figureNo call on a creeper range: not stated for the 8630 and the Super 1300 TVL-LS.
Which is faster on the road?30 km/h (18.6 mph)Traktorenlexikon, “AGCO-Allis 8630”43.7 km/h (27.2 mph)Traktorenlexikon, “Schlüter Super 1300 TVL - LS”AheadThe Schlüter Super 1300 TVL-LS has 46% more top speed (13.7 km/h / 8.5 mph) than the AGCO-ALLIS 8630 (both top speed forward, as stated by the source).
Which offers more PTO speeds?540/540E/1000E/1000 rpmTraktorenlexikon, “AGCO-Allis 8630”674/1126 rpmTraktorenlexikon, “Schlüter Super 1300 TVL - LS”No figureNo call on PTO speeds: no standard PTO speed stated for the Super 1300 TVL-LS.
Which PTO runs independently of the ground drive?independentTraktorenlexikon, “AGCO-Allis 8630”independentTraktorenlexikon, “Schlüter Super 1300 TVL - LS”EvenEven on PTO independence: every PTO is independent.
Which drives on both axles?4WDTraktorenlexikon, “AGCO-Allis 8630”4WDTraktorenlexikon, “Schlüter Super 1300 TVL - LS”EvenEven on drive: every machine is available with four-wheel drive.
Which is newer, and what about parts?1991–19971992EvenSame era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The AGCO-ALLIS 8630 has 25% more hydraulic flow (12.4 L/min / 3.3 gpm) than the Schlüter Super 1300 TVL-LS (both pump flow, as stated by the source).
  • The Schlüter Super 1300 TVL-LS is 21% heavier (1,065 kg / 2,348 lb) than the AGCO-ALLIS 8630 (both unladen weight, as stated by the source).
  • The Schlüter Super 1300 TVL-LS has 46% more top speed (13.7 km/h / 8.5 mph) than the AGCO-ALLIS 8630 (both top speed forward, as stated by the source).
  • Even on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on PTO independence: every PTO is independent.
  • Even on drive: every machine is available with four-wheel drive.
  • Same era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.
  • Not comparable on power at the PTO shaft: the 8630 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the Super 1300 TVL-LS has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, three-point lift, maximum permissible mass, a creeper range and PTO speeds.

← Every figure for both machines, side by side, with sources