AGCO-ALLIS 8630 vs Landini 14.500 (DT) "TL 24 N/G"

5 material differences · fewer than 12

Tractor one

1991–1997

No measured PTO figure

Tractor two

1978–1993

No measured PTO figure

Which should you choose?

Read our verdict on the 8630 and the 14.500 (DT) "TL 24 N/G" → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

5 material differences · 10 fields identical or within 5%, which is not counted as material

AGCO-ALLIS 8630 and Landini 14.500 (DT) "TL 24 N/G", field by field
Field	8630	14.500 (DT) "TL 24 N/G"	Gap
Engine
Engine power, claimed claimed	128.2 hp	130.2 hp	—
Engine declared	S.L.H. 1000.6 AT	Perkins AT 6.354.4	differs
Displacement declared	6.00 L	5.80 L	—
Maximum torque declared	329 lb·ft · 446 N·m	359 lb·ft · 487 N·m	+9% 14.500 (DT) "TL 24 N/G"
Transmission
Top speed declared	18.6 mph · 30 km/h	18.6 mph · 30 km/h	—
Clutch declared	Pedal-operated dry S.L.H. double clutch	Pedal-operated dry LUK double clutch	differs
Hydraulics & hitch
Hydraulic centre declared	Open centre	—	—
Pump flow declared	16.2 gpm · 61.2 L/min	16.4 gpm · 62.0 L/min	—
Pressure declared	2,176 psi · 150 bar	—	—
Three-point lift at ends declared	10,939 lb · 4,962 kg	—	—
Rear PTO speeds declared	540/540E/1000E/1000 rpm	540/1000 rpm	differs
Weight & dimensions
Unladen weight declared	11,100 lb · 5,035 kg	11,530 lb · 5,230 kg	—
Maximum permissible mass declared	17,857 lb · 8,100 kg	—	—
Wheelbase declared	110.0 in · 2,794 mm	111.8 in · 2,840 mm	—
Length declared	183.6 in · 4,663 mm	183.5 in · 4,660 mm	—
Width declared	90.0 in · 2,286 mm	91.7 in · 2,330 mm	—
Height declared	116.2 in · 2,951 mm	114.6 in · 2,910 mm	—
Ground clearance declared	20.8 in · 528 mm	20.1 in · 510 mm	—
Turning radius, braked declared	12.8 ft · 3.90 m	—	—
Fuel tank declared	221.9 qt · 210.0 L	190.2 qt · 180.0 L	+17% 8630

Source

Source