AGCO-ALLIS 8630 vs Hürlimann H-6136 (A)

11 material differences · fewer than 12

Tractor one

1991–1997

No measured PTO figure

Tractor two

1984–1989

No measured PTO figure

Which should you choose?

Read our verdict on the 8630 and the H-6136 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

11 material differences · 6 fields identical or within 5%, which is not counted as material

AGCO-ALLIS 8630 and Hürlimann H-6136 (A), field by field
Field	8630	H-6136 (A)	Gap
Engine
Engine power, claimed claimed	128.2 hp	128.2 hp	—
Engine declared	S.L.H. 1000.6 AT	HÜRLIMANN H-1106/13	differs
Displacement declared	6.00 L	6.84 L	+14% H-6136 (A)
Maximum torque declared	329 lb·ft · 446 N·m	354 lb·ft · 480 N·m	+8% H-6136 (A)
Transmission
Top speed declared	18.6 mph · 30 km/h	15.5–18.6 mph · 25–30 km/h	differs
Clutch declared	Pedal-operated dry S.L.H. double clutch	Pedal-operated dry single-disc clutch	differs
Hydraulics & hitch
Hydraulic centre declared	Open centre	—	—
Pump flow declared	16.2 gpm · 61.2 L/min	—	—
Pressure declared	2,176 psi · 150 bar	—	—
Three-point lift at ends declared	10,939 lb · 4,962 kg	12,125 lb · 5,500 kg	+11% H-6136 (A)
Rear PTO speeds declared	540/540E/1000E/1000 rpm	540/1000 rpm	differs
Weight & dimensions
Unladen weight declared	11,100 lb · 5,035 kg	11,574 lb · 5,250 kg	—
Maximum permissible mass declared	17,857 lb · 8,100 kg	17,857 lb · 8,100 kg	—
Wheelbase declared	110.0 in · 2,794 mm	112.4 in · 2,856 mm	—
Length declared	183.6 in · 4,663 mm	177.9 in · 4,519 mm	—
Width declared	90.0 in · 2,286 mm	86.6 in · 2,200 mm	—
Height declared	116.2 in · 2,951 mm	108.1 in · 2,745 mm	+8% 8630
Ground clearance declared	20.8 in · 528 mm	19.7 in · 500 mm	+6% 8630
Turning radius, braked declared	12.8 ft · 3.90 m	11.5 ft · 3.52 m	+11% 8630
Fuel tank declared	221.9 qt · 210.0 L	243.0 qt · 230.0 L	+10% H-6136 (A)

Source

Source