AGCO-ALLIS 8610 vs VALMET 6650 HiTech

14 material differences

Tractor one

1991–1997

No measured PTO figure

Tractor two

1998–2003

No measured PTO figure

Which should you choose?

Read our verdict on the 8610 and the 6650 HiTech → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

14 material differences · 4 fields identical or within 5%, which is not counted as material

AGCO-ALLIS 8610 and VALMET 6650 HiTech, field by field
Field	8610	6650 HiTech	Gap
Engine
Engine power, claimed claimed	108.5 hp	108.5 hp	—
Engine declared	S.L.H. 1000.6 A	VALMET 420 DWRE	differs
Displacement declared	6.00 L	4.40 L	+36% 8610
Maximum torque declared	256 lb·ft · 347 N·m	339 lb·ft · 460 N·m	+33% 6650 HiTech
Transmission
Top speed declared	18.6 mph · 30 km/h	18.6–24.9 mph · 30–40 km/h	differs
Clutch declared	Pedal operated dry S.L.H. double clutch	Electrically operated dry Fichtel & Sachs single-disc clutch	differs
Hydraulics & hitch
Hydraulic centre declared	Open centre	—	—
Pump flow declared	16.3 gpm · 61.7 L/min	18.7 gpm · 70.8 L/min	+15% 6650 HiTech
Pressure declared	2,176 psi · 150 bar	2,901 psi · 200 bar	+33% 6650 HiTech
Three-point lift at ends declared	10,441 lb · 4,736 kg	12,346 lb · 5,600 kg	+18% 6650 HiTech
Rear PTO speeds declared	540/540E/1000E/1000 rpm	540/1000 rpm	differs
Weight & dimensions
Unladen weight declared	10,869 lb · 4,930 kg	9,921 lb · 4,500 kg	+10% 8610
Maximum permissible mass declared	16,535 lb · 7,500 kg	16,535 lb · 7,500 kg	—
Wheelbase declared	108.3 in · 2,750 mm	91.6 in · 2,326 mm	+18% 8610
Length declared	179.5 in · 4,560 mm	178.0 in · 4,520 mm	—
Width declared	92.5 in · 2,350 mm	92.9 in · 2,360 mm	—
Height declared	113.0 in · 2,870 mm	107.1 in · 2,720 mm	+6% 8610
Ground clearance declared	19.3 in · 490 mm	17.1 in · 434 mm	+13% 8610
Turning radius, braked declared	16.4 ft · 5.00 m	—	—
Fuel tank declared	243.0 qt · 230.0 L	174.4 qt · 165.0 L	+39% 8610

Source

Source