12 material differences

Tractor oneAGCO-ALLIS 86101991–1997No measured PTO figureTractor twoHürlimann H-5116 T (A)1984–1989No measured PTO figure

Which should you choose?

Read our verdict on the 8610 and the H-5116 T (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

12 material differences · 4 fields identical or within 5%, which is not counted as material

AGCO-ALLIS 8610 and Hürlimann H-5116 T (A), field by field
Field	8610	H-5116 T (A)	Gap
Engine
Engine power, claimed claimed	108.5 hp	108.5 hp	—
Engine declared	S.L.H. 1000.6 A	HÜRLIMANN H-1105/11-Turbo	differs
Displacement declared	6.00 L	5.70 L	—
Maximum torque declared	256 lb·ft · 347 N·m	302 lb·ft · 410 N·m	+18% H-5116 T (A)
Transmission
Top speed declared	18.6 mph · 30 km/h	15.5–18.6 mph · 25–30 km/h	differs
Clutch declared	Pedal operated dry S.L.H. double clutch	Pedal operated dry single plate clutch	differs
Hydraulics & hitch
Hydraulic centre declared	Open centre	—	—
Pump flow declared	16.3 gpm · 61.7 L/min	—	—
Pressure declared	2,176 psi · 150 bar	—	—
Three-point lift, at the coupling points declared	10,441 lb · 4,736 kg	10,340 lb · 4,690 kg	—
Rear PTO speeds declared	540/540E/1000E/1000 rpm	540/1000 rpm	differs
Weight & dimensions
Unladen weight declared	10,869 lb · 4,930 kg	9,259 lb · 4,200 kg	+17% 8610
Maximum permissible mass declared	16,535 lb · 7,500 kg	—	—
Wheelbase declared	108.3 in · 2,750 mm	108.9 in · 2,767 mm	—
Length declared	179.5 in · 4,560 mm	166.6 in · 4,231 mm	+8% 8610
Width declared	92.5 in · 2,350 mm	83.5–108.3 in · 2,120–2,750 mm	differs
Height, over the cab declared	113.0 in · 2,870 mm	106.1 in · 2,695 mm	+6% 8610
Ground clearance declared	19.3 in · 490 mm	26.0 in · 660 mm	+35% H-5116 T (A)
Turning radius, braked declared	16.4 ft · 5.00 m	11.2 ft · 3.40 m	+47% 8610
Fuel tank declared	243.0 qt · 230.0 L	137.4 qt · 130.0 L	+77% 8610

Source

Source