AGCO-ALLIS 8610 vs Hürlimann H-5110 (A)

11 material differences · fewer than 12

Tractor one

1991–1997

No measured PTO figure

Tractor two

1979–1983

No measured PTO figure

Which should you choose?

Read our verdict on the 8610 and the H-5110 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

11 material differences · 5 fields identical or within 5%, which is not counted as material

AGCO-ALLIS 8610 and Hürlimann H-5110 (A), field by field
Field	8610	H-5110 (A)	Gap
Engine
Engine power, claimed claimed	108.5 hp	108.5 hp	—
Engine declared	S.L.H. 1000.6 A	Hürlimann H-1105/10 or H-1105/10-Turbo	differs
Displacement declared	6.00 L	5.70 L	—
Maximum torque declared	256 lb·ft · 347 N·m	292 lb·ft · 396 N·m	+14% H-5110 (A)
Transmission
Top speed declared	18.6 mph · 30 km/h	15.5–18.6 mph · 25–30 km/h	differs
Clutch declared	Pedal operated dry S.L.H. double clutch	Pedal operated dry SAME single-disc clutch	differs
Hydraulics & hitch
Hydraulic centre declared	Open centre	—	—
Pump flow declared	16.3 gpm · 61.7 L/min	—	—
Pressure declared	2,176 psi · 150 bar	—	—
Three-point lift at ends declared	10,441 lb · 4,736 kg	8,543 lb · 3,875 kg	+22% 8610
Rear PTO speeds declared	540/540E/1000E/1000 rpm	540/1000 rpm	differs
Weight & dimensions
Unladen weight declared	10,869 lb · 4,930 kg	9,480–10,582 lb · 4,300–4,800 kg	differs
Maximum permissible mass declared	16,535 lb · 7,500 kg	16,094 lb · 7,300 kg	—
Wheelbase declared	108.3 in · 2,750 mm	102.6–103.9 in · 2,607–2,640 mm	differs
Length declared	179.5 in · 4,560 mm	172.4 in · 4,380 mm	—
Width declared	92.5 in · 2,350 mm	81.5 in · 2,070 mm	+14% 8610
Height declared	113.0 in · 2,870 mm	112.2 in · 2,850 mm	—
Ground clearance declared	19.3 in · 490 mm	17.7 in · 450 mm	+9% 8610
Turning radius, braked declared	16.4 ft · 5.00 m	—	—
Fuel tank declared	243.0 qt · 230.0 L	169.1 qt · 160.0 L	+44% 8610

Source

Source