10 material differences · fewer than 12

Tractor oneAGCO-ALLIS 86101991–1997No measured PTO figureTractor twoFord 8240 (A)1991–1997No measured PTO figure

Which should you choose?

Read our verdict on the 8610 and the 8240 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

10 material differences · 5 fields identical or within 5%, which is not counted as material

AGCO-ALLIS 8610 and Ford 8240 (A), field by field
Field	8610	8240 (A)	Gap
Engine
Engine power, claimed claimed	108.5 hp	108.5 hp	—
Engine declared	S.L.H. 1000.6 A	FORD-POWERSTAR TA 456 CID-NA	differs
Displacement declared	6.00 L	7.48 L	+25% 8240 (A)
Maximum torque declared	256 lb·ft · 347 N·m	322 lb·ft · 436 N·m	+26% 8240 (A)
Transmission
Top speed declared	18.6 mph · 30 km/h	18.6–24.9 mph · 30–40 km/h	differs
Clutch declared	Pedal operated dry S.L.H. double clutch	—	—
Hydraulics & hitch
Hydraulic centre declared	Open centre	—	—
Hydraulic control declared	—	Load sensing	—
Pump flow declared	16.3 gpm · 61.7 L/min	21.1 gpm · 80.0 L/min	+30% 8240 (A)
Pressure declared	2,176 psi · 150 bar	2,582 psi · 178 bar	+19% 8240 (A)
Rear PTO speeds declared	540/540E/1000E/1000 rpm	540 rpm / 1000 rpm	differs
Weight & dimensions
Unladen weight declared	10,869 lb · 4,930 kg	9,824 lb · 4,456 kg	+11% 8610
Maximum permissible mass declared	16,535 lb · 7,500 kg	—	—
Wheelbase declared	108.3 in · 2,750 mm	105.9 in · 2,690 mm	—
Length declared	179.5 in · 4,560 mm	171.7 in · 4,361 mm	—
Width declared	92.5 in · 2,350 mm	82.5–107.6 in · 2,095–2,733 mm	differs
Height, over the cab declared	113.0 in · 2,870 mm	108.9 in · 2,766 mm	—
Ground clearance declared	19.3 in · 490 mm	26.4 in · 670 mm	+37% 8240 (A)
Turning radius, braked declared	16.4 ft · 5.00 m	—	—
Fuel tank declared	243.0 qt · 230.0 L	240.0 qt · 227.1 L	—

Source

Source