AGCO-ALLIS 8610 vs Deutz-Fahr DX 120

11 material differences · fewer than 12

Tractor one

1991–1997

No measured PTO figure

Tractor two

1980–1983

No measured PTO figure

Which should you choose?

Read our verdict on the 8610 and the DX 120 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

11 material differences · 6 fields identical or within 5%, which is not counted as material

AGCO-ALLIS 8610 and Deutz-Fahr DX 120, field by field
Field	8610	DX 120	Gap
Engine
Engine power, claimed claimed	108.5 hp	108.0 hp	—
Engine declared	S.L.H. 1000.6 A	KHD F6L 913	differs
Displacement declared	6.00 L	6.13 L	—
Maximum torque declared	256 lb·ft · 347 N·m	286 lb·ft · 388 N·m	+12% DX 120
Transmission
Top speed declared	18.6 mph · 30 km/h	15.5–18.6 mph · 25–30 km/h	differs
Clutch declared	Pedal operated dry S.L.H. double clutch	Independent dry double clutch	differs
Hydraulics & hitch
Hydraulic centre declared	Open centre	—	—
Pump flow declared	16.3 gpm · 61.7 L/min	14.7 gpm · 55.7 L/min	+11% 8610
Pressure declared	2,176 psi · 150 bar	3,046–3,771 psi · 210–260 bar	differs
Three-point lift at ends declared	10,441 lb · 4,736 kg	11,464 lb · 5,200 kg	+10% DX 120
Rear PTO speeds declared	540/540E/1000E/1000 rpm	540 rpm / 1000 rpm	differs
Weight & dimensions
Unladen weight declared	10,869 lb · 4,930 kg	9,789 lb · 4,440 kg	+11% 8610
Maximum permissible mass declared	16,535 lb · 7,500 kg	—	—
Wheelbase declared	108.3 in · 2,750 mm	105.8 in · 2,688 mm	—
Length declared	179.5 in · 4,560 mm	176.8 in · 4,490 mm	—
Width declared	92.5 in · 2,350 mm	90.7 in · 2,304 mm	—
Height declared	113.0 in · 2,870 mm	109.4 in · 2,780 mm	—
Ground clearance declared	19.3 in · 490 mm	23.2 in · 590 mm	+20% DX 120
Turning radius, braked declared	16.4 ft · 5.00 m	—	—
Fuel tank declared	243.0 qt · 230.0 L	126.8 qt · 120 L	+92% 8610

Source

Source