12 material differences

Tractor oneAGCO-ALLIS 86101991–1997No measured PTO figureTractor twoCase-IH 5140 Maxxum1989–1997No measured PTO figure

Which should you choose?

Read our verdict on the 8610 and the 5140 Maxxum → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

Field by field

12 material differences · 4 fields identical or within 5%, which is not counted as material

AGCO-ALLIS 8610 and Case-IH 5140 Maxxum, field by field
Field86105140 MaxxumGap
Engine
Engine power, claimed claimed108.5 hp108.5 hp—
Engine declaredS.L.H. 1000.6 ACUMMINS NCE 6 T-590differs
Displacement declared6.00 L5.88 L—
Maximum torque declared256 lb·ft · 347 N·m315 lb·ft · 427 N·m+23% 5140 Maxxum
Transmission
Top speed declared18.6 mph · 30 km/h15.5–24.9 mph · 25–40 km/hdiffers
Clutch declaredPedal operated dry S.L.H. double clutch——
Hydraulics & hitch
Hydraulic centre declaredOpen centre——
Pump flow declared16.3 gpm · 61.7 L/min19.2 gpm · 72.6 L/min+18% 5140 Maxxum
Pressure declared2,176 psi · 150 bar3,191 psi · 220 bar+47% 5140 Maxxum
Three-point lift, at the coupling points declared10,441 lb · 4,736 kg9,824 lb · 4,456 kg+6% 8610
Rear PTO speeds declared540/540E/1000E/1000 rpm540/1000 rpmdiffers
Weight & dimensions
Unladen weight declared10,869 lb · 4,930 kg12,114 lb · 5,495 kg+11% 5140 Maxxum
Maximum permissible mass declared16,535 lb · 7,500 kg17,196 lb · 7,800 kg—
Wheelbase declared108.3 in · 2,750 mm101.8 in · 2,585 mm+6% 8610
Length declared179.5 in · 4,560 mm175.3 in · 4,453 mm—
Width declared92.5 in · 2,350 mm86.8 in · 2,204 mm+7% 8610
Ground clearance declared19.3 in · 490 mm18.3 in · 465 mm+5% 8610
Turning radius, braked declared16.4 ft · 5.00 m——
Fuel tank declared243.0 qt · 230.0 L142.7 qt · 135.0 L+70% 8610

Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.

AGCO-ALLIS 8610 sources

Source
  • Source: Traktorenlexikon, “AGCO-Allis 8610”

Case-IH 5140 Maxxum sources

Source
  • Source: Traktorenlexikon, “Case-IH 5140”