AGCO-ALLIS 7630 vs WHITE 125

9 material differences · fewer than 12

Tractor one

1991–1992

No measured PTO figure

Tractor two

1990–1992

No measured PTO figure

Which should you choose?

Read our verdict on the 7630 and the 125 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

9 material differences · 8 fields identical or within 5%, which is not counted as material

AGCO-ALLIS 7630 and WHITE 125, field by field
Field	7630	125	Gap
Engine
Engine power, claimed claimed	122.3 hp	122.3 hp	—
Engine declared	S.L.H. 1056 P	CUMMINS BT 6-590	differs
Displacement declared	6.24 L	5.89 L	+6% 7630
Maximum torque declared	310 lb·ft · 420 N·m	—	—
Transmission
Top speed declared	18.6 mph · 30 km/h	18.6 mph · 30 km/h	—
Clutch declared	Pedal-operated dry S.L.H. double clutch	Pedal-operated, dry single-disc clutch	differs
Hydraulics & hitch
Hydraulic centre declared	Open centre	Open centre	—
Pump flow declared	16.9 gpm · 64.0 L/min	22.0 gpm · 83.3 L/min	+30% 125
Pressure declared	3,046 psi · 210 bar	—	—
Three-point lift at ends declared	11,905 lb · 5,400 kg	7,211 lb · 3,271 kg	+65% 7630
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	11,398 lb · 5,170 kg	12,251 lb · 5,557 kg	+7% 125
Maximum permissible mass declared	17,857 lb · 8,100 kg	—	—
Wheelbase declared	110.0 in · 2,794 mm	111.5 in · 2,832 mm	—
Length declared	176.8 in · 4,491 mm	174.0 in · 4,420 mm	—
Width declared	86.8 in · 2,205 mm	115.9 in · 2,945 mm	+34% 125
Height declared	118.4 in · 3,007 mm	117.2 in · 2,977 mm	—
Ground clearance declared	21.6 in · 549 mm	22.0 in · 559 mm	—
Turning radius, braked declared	11.5 ft · 3.52 m	12.2 ft · 3.72 m	+6% 125
Fuel tank declared	221.9 qt · 210.0 L	100.4–132.1 qt · 95.0–125.0 L	differs

Source

Source