AGCO-ALLIS 7630 vs SOMECA 1280 (TD)

12 material differences

Tractor one

1991–1992

No measured PTO figure

Tractor two

1979–1983

No measured PTO figure

Which should you choose?

Read our verdict on the 7630 and the 1280 (TD) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

12 material differences · 4 fields identical or within 5%, which is not counted as material

AGCO-ALLIS 7630 and SOMECA 1280 (TD), field by field
Field	7630	1280 (TD)	Gap
Engine
Engine power, claimed claimed	122.3 hp	121.4 hp	—
Engine declared	S.L.H. 1056 P	FIAT-IVECO 8065.24.217 (317)	differs
Displacement declared	6.24 L	5.50 L	+13% 7630
Maximum torque declared	310 lb·ft · 420 N·m	297 lb·ft · 403 N·m	—
Transmission
Top speed declared	18.6 mph · 30 km/h	15.5–18.6 mph · 25–30 km/h	differs
Clutch declared	Pedal-operated dry S.L.H. double clutch	—	—
Hydraulics & hitch
Hydraulic centre declared	Open centre	—	—
Pump flow declared	16.9 gpm · 64.0 L/min	—	—
Pressure declared	3,046 psi · 210 bar	3,263–3,408 psi · 225–235 bar	differs
Three-point lift at ends declared	11,905 lb · 5,400 kg	10,384 lb · 4,710 kg	+15% 7630
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	11,398 lb · 5,170 kg	12,015 lb · 5,450 kg	+5% 1280 (TD)
Maximum permissible mass declared	17,857 lb · 8,100 kg	—	—
Wheelbase declared	110.0 in · 2,794 mm	108.3 in · 2,750 mm	—
Length declared	176.8 in · 4,491 mm	164.6 in · 4,182 mm	+7% 7630
Width declared	86.8 in · 2,205 mm	78.7 in · 2,000 mm	+10% 7630
Height declared	118.4 in · 3,007 mm	111.9 in · 2,842 mm	+6% 7630
Ground clearance declared	21.6 in · 549 mm	19.7 in · 500 mm	+10% 7630
Turning radius, braked declared	11.5 ft · 3.52 m	13.9 ft · 4.25 m	+21% 1280 (TD)
Fuel tank declared	221.9 qt · 210.0 L	295.9 qt · 280.0 L	+33% 1280 (TD)

Source

Source