10 material differences · fewer than 12

Tractor oneAGCO-ALLIS 76301991–1992No measured PTO figureTractor twoSAME Buffalo 130 (DT)1978–1982No measured PTO figure

Which should you choose?

Read our verdict on the 7630 and the Buffalo 130 (DT) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

10 material differences · 7 fields identical or within 5%, which is not counted as material

AGCO-ALLIS 7630 and SAME Buffalo 130 (DT), field by field
Field	7630	Buffalo 130 (DT)	Gap
Engine
Engine power, claimed claimed	122.3 hp	122.3 hp	—
Engine declared	S.L.H. 1056 P	SAME DA 1056 P	differs
Displacement declared	6.24 L	6.23 L	—
Maximum torque declared	310 lb·ft · 420 N·m	295 lb·ft · 400 N·m	—
Transmission
Top speed declared	18.6 mph · 30 km/h	15.5 mph · 25 km/h	+20% 7630
Clutch declared	Pedal-operated dry S.L.H. double clutch	Pedal operated dry BORG & BECK single plate clutch	differs
Hydraulics & hitch
Hydraulic centre declared	Open centre	—	—
Pump flow declared	16.9 gpm · 64.0 L/min	9.2 gpm · 35.0 L/min	+83% 7630
Pressure declared	3,046 psi · 210 bar	—	—
Three-point lift, at the coupling points declared	11,905 lb · 5,400 kg	10,071 lb · 4,568 kg	+18% 7630
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	11,398 lb · 5,170 kg	9,480 lb · 4,300 kg	+20% 7630
Maximum permissible mass declared	17,857 lb · 8,100 kg	—	—
Wheelbase declared	110.0 in · 2,794 mm	104.7 in · 2,660 mm	—
Length declared	176.8 in · 4,491 mm	170.1 in · 4,320 mm	—
Width declared	86.8 in · 2,205 mm	85.4–113.0 in · 2,170–2,870 mm	differs
Height, over the cab declared	118.4 in · 3,007 mm	111.4 in · 2,830 mm	+6% 7630
Ground clearance declared	21.6 in · 549 mm	20.9 in · 530 mm	—
Turning radius, braked declared	11.5 ft · 3.52 m	13.5 ft · 4.10 m	+16% Buffalo 130 (DT)
Fuel tank declared	221.9 qt · 210.0 L	147.9 qt · 140.0 L	+50% 7630

Source

Source