13 material differences

Tractor oneAGCO-ALLIS 76301991–1992No measured PTO figureTractor twoNew Holland TM 120 (Traktorenlexikon)2002–2007No measured PTO figure

Which should you choose?

Read our verdict on the 7630 and the TM 120 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

13 material differences · 5 fields identical or within 5%, which is not counted as material

AGCO-ALLIS 7630 and New Holland TM 120 (Traktorenlexikon), field by field
Field	7630	TM 120	Gap
Engine
Engine power, claimed claimed	122.3 hp	122.3 hp	—
Engine declared	S.L.H. 1056 P	NEW HOLLAND 675-TA/HD	differs
Displacement declared	6.24 L	7.48 L	+20% TM 120
Maximum torque declared	310 lb·ft · 420 N·m	380 lb·ft · 515 N·m	+23% TM 120
Transmission
Top speed declared	18.6 mph · 30 km/h	24.9 mph · 40 km/h	+33% TM 120
Clutch declared	Pedal-operated dry S.L.H. double clutch	—	—
Hydraulics & hitch
Hydraulic centre declared	Open centre	—	—
Pump flow declared	16.9 gpm · 64.0 L/min	28.8 gpm · 109.0 L/min	+70% TM 120
Pressure declared	3,046 psi · 210 bar	2,799 psi · 193 bar	+9% 7630
Three-point lift, at the coupling points declared	11,905 lb · 5,400 kg	14,925 lb · 6,770 kg	+25% TM 120
Rear PTO speeds declared	540/1000 rpm	540/540E/1000 rpm	differs
Weight & dimensions
Unladen weight declared	11,398 lb · 5,170 kg	11,574 lb · 5,250 kg	—
Maximum permissible mass declared	17,857 lb · 8,100 kg	18,739 lb · 8,500 kg	—
Wheelbase declared	110.0 in · 2,794 mm	107.2 in · 2,723 mm	—
Length declared	176.8 in · 4,491 mm	227.9 in · 5,789 mm	+29% TM 120
Width declared	86.8 in · 2,205 mm	95.3 in · 2,420 mm	+10% TM 120
Height, over the cab declared	118.4 in · 3,007 mm	115.2 in · 2,926 mm	—
Ground clearance declared	21.6 in · 549 mm	15.7 in · 400 mm	+37% 7630
Turning radius, braked declared	11.5 ft · 3.52 m	18.1 ft · 5.52 m	+57% TM 120
Fuel tank declared	221.9 qt · 210.0 L	301.2 qt · 285.0 L	+36% TM 120

Source

Source