AGCO-ALLIS 7630 vs Landini 130 DT

14 material differences

Tractor one

1991–1992

No measured PTO figure

Tractor two

1993–1997

No measured PTO figure

Which should you choose?

Read our verdict on the 7630 and the 130 DT → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

14 material differences · 5 fields identical or within 5%, which is not counted as material

AGCO-ALLIS 7630 and Landini 130 DT, field by field
Field	7630	130 DT	Gap
Engine
Engine power, claimed claimed	122.3 hp	123.2 hp	—
Engine declared	S.L.H. 1056 P	Perkins 1006-6 THR 2	differs
Displacement declared	6.24 L	5.99 L	—
Maximum torque declared	310 lb·ft · 420 N·m	337 lb·ft · 457 N·m	+9% 130 DT
Transmission
Top speed declared	18.6 mph · 30 km/h	24.9 mph · 40 km/h	+33% 130 DT
Clutch declared	Pedal-operated dry S.L.H. double clutch	Pedal operated dry single disc clutch as driving clutch	differs
Hydraulics & hitch
Hydraulic centre declared	Open centre	—	—
Pump flow declared	16.9 gpm · 64.0 L/min	16.2 gpm · 61.5 L/min	—
Pressure declared	3,046 psi · 210 bar	2,901 psi · 200 bar	—
Three-point lift at ends declared	11,905 lb · 5,400 kg	14,330 lb · 6,500 kg	+20% 130 DT
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	11,398 lb · 5,170 kg	13,162 lb · 5,970 kg	+15% 130 DT
Maximum permissible mass declared	17,857 lb · 8,100 kg	21,605 lb · 9,800 kg	+21% 130 DT
Wheelbase declared	110.0 in · 2,794 mm	104.3 in · 2,650 mm	+5% 7630
Length declared	176.8 in · 4,491 mm	213.4 in · 5,420 mm	+21% 130 DT
Width declared	86.8 in · 2,205 mm	92.1 in · 2,340 mm	+6% 130 DT
Height declared	118.4 in · 3,007 mm	101.6 in · 2,580 mm	+17% 7630
Ground clearance declared	21.6 in · 549 mm	20.5 in · 520 mm	+6% 7630
Turning radius, braked declared	11.5 ft · 3.52 m	19.2 ft · 5.85 m	+66% 130 DT
Fuel tank declared	221.9 qt · 210.0 L	190.2 qt · 180 L	+17% 7630

Source

Source