14 material differences
Tractor oneAGCO-ALLIS 76301991–1992No measured PTO figureTractor twoFendt Favorit 712 Variofrom 1999No measured PTO figure
Which should you choose?
Read our verdict on the 7630 and the Favorit 712 Vario → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
14 material differences · 4 fields identical or within 5%, which is not counted as material
| Field | 7630 | Favorit 712 Vario | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 122.3 hp | 122.7 hp | — |
| Engine declared | S.L.H. 1056 P | Deutz BF6M 2013 C | differs |
| Displacement declared | 6.24 L | 5.70 L | +9% 7630 |
| Maximum torque declared | 310 lb·ft · 420 N·m | 453 lb·ft · 613.8 N·m | +46% Favorit 712 Vario |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 31.1 mph · 50 km/h | +67% Favorit 712 Vario |
| Clutch declared | Pedal-operated dry S.L.H. double clutch | Multi-disc clutch | differs |
| Hydraulics & hitch | |||
| Hydraulic centre declared | Open centre | Closed centre | differs |
| Pump flow declared | 16.9 gpm · 64.0 L/min | 20.7 gpm · 78.5 L/min | +23% Favorit 712 Vario |
| Pressure declared | 3,046 psi · 210 bar | 2,466 psi · 170 bar | +24% 7630 |
| Rear PTO speeds declared | 540/1000 rpm | 540/750/1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 11,398 lb · 5,170 kg | 12,566–13,603 lb · 5,700–6,170 kg | differs |
| Maximum permissible mass declared | 17,857 lb · 8,100 kg | 20,944 lb · 9,500 kg | +17% Favorit 712 Vario |
| Wheelbase declared | 110.0 in · 2,794 mm | 106.3 in · 2,700 mm | — |
| Length declared | 176.8 in · 4,491 mm | 181.7–182.7 in · 4,615–4,640 mm | — |
| Width declared | 86.8 in · 2,205 mm | 94.1–95.6 in · 2,390–2,429 mm | differs |
| Ground clearance declared | 21.6 in · 549 mm | 20.8 in · 528 mm | — |
| Turning radius, braked declared | 11.5 ft · 3.52 m | 16.1 ft · 4.90 m | +39% Favorit 712 Vario |
| Fuel tank declared | 221.9 qt · 210.0 L | 317.0 qt · 300 L | +43% Favorit 712 Vario |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
AGCO-ALLIS 7630 sources
Source
- Source: Traktorenlexikon, “AGCO-Allis 7630”
Fendt Favorit 712 Vario sources
Source
- Source: Traktorenlexikon, “Fendt Favorit 712 Vario”
- Source: Traktorenlexikon, “Fendt Favorit 714 Vario”
- Source: OECD test report 1943, 2000