AGCO-ALLIS 7630 vs Deutz-Fahr Agrotron 130.6

11 material differences · fewer than 12

Tractor one

1991–1992

No measured PTO figure

Tractor two

2005–2008

No measured PTO figure

Which should you choose?

Read our verdict on the 7630 and the Agrotron 130.6 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

11 material differences · 7 fields identical or within 5%, which is not counted as material

AGCO-ALLIS 7630 and Deutz-Fahr Agrotron 130.6, field by field
Field	7630	Agrotron 130.6	Gap
Engine
Engine power, claimed claimed	122.3 hp	120.4 hp	—
Engine declared	S.L.H. 1056 P	Deutz BF6M 2012 C	differs
Displacement declared	6.24 L	6.06 L	—
Maximum torque declared	310 lb·ft · 420 N·m	378 lb·ft · 512 N·m	+22% Agrotron 130.6
Transmission
Top speed declared	18.6 mph · 30 km/h	24.9–31.1 mph · 40–50 km/h	differs
Clutch declared	Pedal-operated dry S.L.H. double clutch	Hydraulically operated wet ZF multi-disc clutch	differs
Hydraulics & hitch
Hydraulic centre declared	Open centre	Open centre	—
Pump flow declared	16.9 gpm · 64.0 L/min	21.9 gpm · 83.0 L/min	+30% Agrotron 130.6
Pressure declared	3,046 psi · 210 bar	—	—
Three-point lift at ends declared	11,905 lb · 5,400 kg	13,713 lb · 6,220 kg	+15% Agrotron 130.6
Rear PTO speeds declared	540/1000 rpm	540 rpm / 1000 rpm	differs
Weight & dimensions
Unladen weight declared	11,398 lb · 5,170 kg	12,037 lb · 5,460 kg	+6% Agrotron 130.6
Maximum permissible mass declared	17,857 lb · 8,100 kg	18,739 lb · 8,500 kg	—
Wheelbase declared	110.0 in · 2,794 mm	104.2 in · 2,647 mm	+6% 7630
Length declared	176.8 in · 4,491 mm	180.6 in · 4,587 mm	—
Width declared	86.8 in · 2,205 mm	90.7 in · 2,304 mm	—
Height declared	118.4 in · 3,007 mm	115.0 in · 2,922 mm	—
Ground clearance declared	21.6 in · 549 mm	20.5 in · 520 mm	+6% 7630
Turning radius, braked declared	11.5 ft · 3.52 m	—	—
Fuel tank declared	221.9 qt · 210.0 L	317.0 qt · 300 L	+43% Agrotron 130.6

Source

Source