AGCO-ALLIS 7630 vs Case-IH MXM 120

12 material differences

Tractor one

1991–1992

No measured PTO figure

Tractor two

2002–2007

No measured PTO figure

Which should you choose?

Read our verdict on the 7630 and the MXM 120 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

12 material differences · 6 fields identical or within 5%, which is not counted as material

AGCO-ALLIS 7630 and Case-IH MXM 120, field by field
Field	7630	MXM 120	Gap
Engine
Engine power, claimed claimed	122.3 hp	122.3 hp	—
Engine declared	S.L.H. 1056 P	IVECO 675 TA/HD	differs
Displacement declared	6.24 L	7.48 L	+20% MXM 120
Maximum torque declared	310 lb·ft · 420 N·m	372 lb·ft · 505 N·m	+20% MXM 120
Transmission
Top speed declared	18.6 mph · 30 km/h	24.9 mph · 40 km/h	+33% MXM 120
Clutch declared	Pedal-operated dry S.L.H. double clutch	—	—
Hydraulics & hitch
Hydraulic centre declared	Open centre	Closed centre	differs
Hydraulic control declared	—	Load sensing	—
Pump flow declared	16.9 gpm · 64.0 L/min	32.1 gpm · 121.5 L/min	+90% MXM 120
Pressure declared	3,046 psi · 210 bar	2,466 psi · 170 bar	+24% 7630
Three-point lift at ends declared	11,905 lb · 5,400 kg	14,925 lb · 6,770 kg	+25% MXM 120
Rear PTO speeds declared	540/1000 rpm	540E/540/1000 rpm	differs
Weight & dimensions
Unladen weight declared	11,398 lb · 5,170 kg	11,995 lb · 5,441 kg	—
Maximum permissible mass declared	17,857 lb · 8,100 kg	18,739 lb · 8,500 kg	—
Wheelbase declared	110.0 in · 2,794 mm	107.2 in · 2,723 mm	—
Length declared	176.8 in · 4,491 mm	184.8 in · 4,694 mm	—
Width declared	86.8 in · 2,205 mm	79.2 in · 2,012 mm	+10% 7630
Height declared	118.4 in · 3,007 mm	119.3 in · 3,030 mm	—
Ground clearance declared	21.6 in · 549 mm	15.6 in · 395 mm	+39% 7630
Turning radius, braked declared	11.5 ft · 3.52 m	—	—
Fuel tank declared	221.9 qt · 210.0 L	301.2 qt · 285.0 L	+36% MXM 120

Source

Source