AGCO-ALLIS 6690 vs VALMET 6350 HiTech

12 material differences

Tractor one

1991–1997

No measured PTO figure

Tractor two

1999–2006

No measured PTO figure

Which should you choose?

Read our verdict on the 6690 and the 6350 HiTech → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

12 material differences · 5 fields identical or within 5%, which is not counted as material

AGCO-ALLIS 6690 and VALMET 6350 HiTech, field by field
Field	6690	6350 HiTech	Gap
Engine
Engine power, claimed claimed	88.8 hp	88.8 hp	—
Engine declared	S.L.H. 1000.4 AT	VALMET 420 DSRE or 44.311 DT	differs
Displacement declared	4.00 L	4.40 L	+10% 6350 HiTech
Maximum torque declared	224 lb·ft · 304 N·m	—	—
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6–24.9 mph · 30–40 km/h	—
Clutch declared	Pedal-operated dry Same double clutch type 12 inch	—	—
Hydraulics & hitch
Hydraulic centre declared	Open centre	—	—
Pump flow declared	9.5 gpm · 35.8 L/min	18.5 gpm · 70.0 L/min	+96% 6350 HiTech
Pressure declared	3,046 psi · 210 bar	2,901 psi · 200 bar	—
Three-point lift at ends declared	6,790 lb · 3,080 kg	12,346 lb · 5,600 kg	+82% 6350 HiTech
Rear PTO speeds declared	540/1000/540E/1000E rpm	540/1000 rpm	differs
Weight & dimensions
Unladen weight declared	6,856 lb · 3,110 kg	10,516 lb · 4,770 kg	+53% 6350 HiTech
Maximum permissible mass declared	11,464 lb · 5,200 kg	19,842 lb · 9,000 kg	+73% 6350 HiTech
Wheelbase declared	96.4 in · 2,449 mm	91.6 in · 2,326 mm	+5% 6690
Length declared	161.2 in · 4,094 mm	180.5 in · 4,585 mm	+12% 6350 HiTech
Width declared	82.4 in · 2,093 mm	92.3 in · 2,345 mm	+12% 6350 HiTech
Height declared	111.2 in · 2,824 mm	110.2 in · 2,800 mm	—
Ground clearance declared	17.3 in · 440 mm	17.1 in · 434 mm	—
Turning radius, braked declared	9.6 ft · 2.94 m	15.3 ft · 4.65 m	+58% 6350 HiTech
Fuel tank declared	83.5 qt · 79.0 L	174.4 qt · 165.0 L	+109% 6350 HiTech

Source

Source