9 material differences · fewer than 12

Tractor oneAGCO-ALLIS 66901991–1997No measured PTO figureTractor twoHürlimann H-488 T "Prestige"1989–1998No measured PTO figure

Which should you choose?

Read our verdict on the 6690 and the H-488 T "Prestige" → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

Field by field

9 material differences · 4 fields identical or within 5%, which is not counted as material

AGCO-ALLIS 6690 and Hürlimann H-488 T "Prestige", field by field
Field6690H-488 T "Prestige"Gap
Engine
Engine power, claimed claimed88.8 hp88.8 hp—
Engine declaredS.L.H. 1000.4 ATHürlimann H-1000.4 WTdiffers
Displacement declared4.00 L4.00 L—
Maximum torque declared224 lb·ft · 304 N·m225 lb·ft · 305 N·m—
Transmission
Top speed declared18.6–24.9 mph · 30–40 km/h18.6 mph · 30 km/hdiffers
Clutch declaredPedal-operated dry Same double clutch type 12 inch——
Hydraulics & hitch
Hydraulic centre declaredOpen centre——
Pump flow declared9.5 gpm · 35.8 L/min——
Pressure declared3,046 psi · 210 bar——
Rear PTO speeds declared540/1000/540E/1000E rpm540/1000 rpmdiffers
Weight & dimensions
Unladen weight declared6,856 lb · 3,110 kg7,485 lb · 3,395 kg+9% H-488 T "Prestige"
Maximum permissible mass declared11,464 lb · 5,200 kg——
Wheelbase declared96.4 in · 2,449 mm91.3 in · 2,320 mm+6% 6690
Length declared161.2 in · 4,094 mm159.4 in · 4,050 mm—
Width declared82.4 in · 2,093 mm79.5–103.1 in · 2,020–2,620 mmdiffers
Ground clearance declared17.3 in · 440 mm16.1 in · 410 mm+7% 6690
Turning radius, braked declared9.6 ft · 2.94 m11.8 ft · 3.60 m+22% H-488 T "Prestige"
Fuel tank declared83.5 qt · 79.0 L116.2 qt · 110.0 L+39% H-488 T "Prestige"

Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.

AGCO-ALLIS 6690 sources

Source
  • Source: Traktorenlexikon, “AGCO-Allis 6690”

Hürlimann H-488 T "Prestige" sources

Source
  • Source: Traktorenlexikon, “Hürlimann H 488 T Prestige”