AGCO-ALLIS 6690 or Case-IH 5120 Maxxum?

Which should you choose?

The data can’t decide this. Power at the PTO shaft cannot be compared: the 6690 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 5120 Maxxum has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.

  • The Case-IH 5120 Maxxum suits loader and hydraulic implement work better on this data: 109% (39.2 L/min / 10.4 gpm) more hydraulic flow and 41% (1,254 kg / 2,765 lb) more three-point lift.
  • The Case-IH 5120 Maxxum suits road haulage better on this data: 44% (2,300 kg / 5,071 lb) more maximum permissible mass.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for AGCO-ALLIS 6690 and Case-IH 5120 Maxxum, with the call on each
Question66905120 MaxxumCall
Which puts more power through the PTO shaft?66.2 kW (88.8 hp)Traktorenlexikon, “AGCO-Allis 6690”66.2 kW (88.8 hp)Traktorenlexikon, “Case-IH 5120”Not comparableNot comparable on power at the PTO shaft: the 6690 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 5120 Maxxum has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
Which turns a litre of fuel into more work at the shaft?——No figureNo call on fuel efficiency at the shaft: no figure on record for the 6690 and the 5120 Maxxum.
Which pulls harder at the drawbar?——No figureNo call on drawbar power: no figure on record for the 6690 and the 5120 Maxxum.
Which pumps more oil for implements?35.8 L/min (9.5 gpm)Traktorenlexikon, “AGCO-Allis 6690”75.0 L/min (19.8 gpm)Traktorenlexikon, “Case-IH 5120”AheadThe Case-IH 5120 Maxxum has 109% more hydraulic flow (39.2 L/min / 10.4 gpm) than the AGCO-ALLIS 6690 (both pump flow, as stated by the source).
Which lifts more on the three-point hitch?3,080 kg (6,790 lb)Traktorenlexikon, “AGCO-Allis 6690”4,334 kg (9,555 lb)Traktorenlexikon, “Case-IH 5120”AheadThe Case-IH 5120 Maxxum has 41% more lift (1,254 kg / 2,765 lb) than the AGCO-ALLIS 6690 (both lift at the hitch ends, as stated by the source).
Which is heavier, for traction?3,110 kg (6,856 lb)Traktorenlexikon, “AGCO-Allis 6690”5,315 kg (11,718 lb)Traktorenlexikon, “Case-IH 5120”Ahead (a fact, not an advantage)The Case-IH 5120 Maxxum is 71% heavier (2,205 kg / 4,861 lb) than the AGCO-ALLIS 6690 (both unladen weight, as stated by the source).
Which may carry more ballast and load?5,200 kg (11,464 lb)Traktorenlexikon, “AGCO-Allis 6690”7,500 kg (16,535 lb)Traktorenlexikon, “Case-IH 5120”AheadThe Case-IH 5120 Maxxum has 44% higher maximum permissible mass (2,300 kg / 5,071 lb) than the AGCO-ALLIS 6690 (both maximum permissible mass, as stated by the source).
Which has the wider choice of gears?12 to 30Traktorenlexikon, “AGCO-Allis 6690”16 to 24Traktorenlexikon, “Case-IH 5120”EvenEven on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers a creeper range?——No figureNo call on a creeper range: not stated for the 6690 and the 5120 Maxxum.
Which is faster on the road?30 km/h (18.6 mph) to 40 km/h (24.9 mph)Traktorenlexikon, “AGCO-Allis 6690”30 km/h (18.6 mph) to 40 km/h (24.9 mph)Traktorenlexikon, “Case-IH 5120”EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers more PTO speeds?540/1000/540E/1000E rpmTraktorenlexikon, “AGCO-Allis 6690”540/1000 rpmTraktorenlexikon, “Case-IH 5120”EvenEven on PTO speeds: the same speeds (540, 1000 rpm).
Which PTO runs independently of the ground drive?independentTraktorenlexikon, “AGCO-Allis 6690”independentTraktorenlexikon, “Case-IH 5120”EvenEven on PTO independence: every PTO is independent.
Which drives on both axles?Two-wheel or four-wheel driveTraktorenlexikon, “AGCO-Allis 6690”4WDTraktorenlexikon, “Case-IH 5120”EvenEven on drive: every machine is available with four-wheel drive.
Which is newer, and what about parts?1991–19971989–1997EvenSame era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The Case-IH 5120 Maxxum has 109% more hydraulic flow (39.2 L/min / 10.4 gpm) than the AGCO-ALLIS 6690 (both pump flow, as stated by the source).
  • The Case-IH 5120 Maxxum has 41% more lift (1,254 kg / 2,765 lb) than the AGCO-ALLIS 6690 (both lift at the hitch ends, as stated by the source).
  • The Case-IH 5120 Maxxum is 71% heavier (2,205 kg / 4,861 lb) than the AGCO-ALLIS 6690 (both unladen weight, as stated by the source).
  • The Case-IH 5120 Maxxum has 44% higher maximum permissible mass (2,300 kg / 5,071 lb) than the AGCO-ALLIS 6690 (both maximum permissible mass, as stated by the source).
  • Even on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on PTO speeds: the same speeds (540, 1000 rpm).
  • Even on PTO independence: every PTO is independent.
  • Even on drive: every machine is available with four-wheel drive.
  • Same era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.
  • Not comparable on power at the PTO shaft: the 6690 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 5120 Maxxum has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power and a creeper range.

← Every figure for both machines, side by side, with sources