AGCO-ALLIS 6670 vs Fiat 70-56 LM (DT

16 material differences

Tractor one

1991–1999

No measured PTO figure

Tractor two

from 1988

No measured PTO figure

Which should you choose?

Read our verdict on the 6670 and the 70-56 LM (DT → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

16 material differences · 2 fields identical or within 5%, which is not counted as material

AGCO-ALLIS 6670 and Fiat 70-56 LM (DT, field by field
Field	6670	70-56 LM (DT	Gap
Engine
Engine power, claimed claimed	69.1 hp	69.1 hp	—
Engine declared	S.L.H. 1000.4 A	Fiat 8045.06.206 or 307	differs
Displacement declared	4.00 L	3.61 L	+11% 6670
Maximum torque declared	176 lb·ft · 239 N·m	164 lb·ft · 222 N·m	+8% 6670
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6 mph · 30 km/h	differs
Hydraulics & hitch
Hydraulic centre declared	Open centre	Open centre	—
Pump flow declared	9.5 gpm · 36.0 L/min	8.7 gpm · 32.8 L/min	+10% 6670
Pressure declared	1,740 psi · 120 bar	3,046 psi · 210 bar	+75% 70-56 LM (DT
Three-point lift at ends declared	6,490 lb · 2,944 kg	5,600 lb · 2,540 kg	+16% 6670
Rear PTO speeds declared	540/1000/540E/1000E rpm	540 rpm	differs
Weight & dimensions
Unladen weight declared	6,173 lb · 2,800 kg	5,357 lb · 2,430 kg	+15% 6670
Wheelbase declared	94.4 in · 2,398 mm	86.7 in · 2,203 mm	+9% 6670
Length declared	160.0 in · 4,064 mm	143.3 in · 3,640 mm	+12% 6670
Width declared	77.6 in · 1,970 mm	71.7 in · 1,820 mm	+8% 6670
Height declared	108.0 in · 2,743 mm	95.3 in · 2,420 mm	+13% 6670
Ground clearance declared	15.0 in · 380 mm	19.7 in · 500 mm	+32% 70-56 LM (DT
Turning radius, braked declared	9.4 ft · 2.85 m	10.7 ft · 3.26 m	+14% 70-56 LM (DT
Fuel tank declared	113.1 qt · 107.0 L	63.4 qt · 60.0 L	+78% 6670

Source

Source