12 material differences
Tractor oneAGCO-ALLIS 66701991–1999No measured PTO figureTractor twoDeutz-Fahr AgroCompakt 3.70 V/F1992–1996No measured PTO figure
Which should you choose?
Read our verdict on the 6670 and the AgroCompakt 3.70 V/F → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
12 material differences · 2 fields identical or within 5%, which is not counted as material
| Field | 6670 | AgroCompakt 3.70 V/F | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 69.1 hp | 69.1 hp | — |
| Engine declared | S.L.H. 1000.4 A | KHD F4L 912 | differs |
| Displacement declared | 4.00 L | 3.77 L | +6% 6670 |
| Maximum torque declared | 176 lb·ft · 239 N·m | 179 lb·ft · 243 N·m | — |
| Transmission | |||
| Top speed declared | 18.6–24.9 mph · 30–40 km/h | 21.7–24.9 mph · 35–40 km/h | differs |
| Hydraulics & hitch | |||
| Hydraulic centre declared | Open centre | — | — |
| Pump flow declared | 9.5 gpm · 36.0 L/min | 10.8 gpm · 41.0 L/min | +14% AgroCompakt 3.70 V/F |
| Pressure declared | 1,740 psi · 120 bar | — | — |
| Three-point lift, at the coupling points declared | 6,490 lb · 2,944 kg | 4,850 lb · 2,200 kg | +34% 6670 |
| Rear PTO speeds declared | 540/1000/540E/1000E rpm | 540 rpm / 1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 6,173 lb · 2,800 kg | 4,960–5,401 lb · 2,250–2,450 kg | differs |
| Maximum permissible mass declared | — | 8,818 lb · 4,000 kg | — |
| Wheelbase declared | 94.4 in · 2,398 mm | 80.5 in · 2,045 mm | +17% 6670 |
| Length declared | 160.0 in · 4,064 mm | 136.6 in · 3,470 mm | +17% 6670 |
| Width declared | 77.6–78.8 in · 1,970–2,002 mm | 43.3–47.2 in · 1,100–1,200 mm | differs |
| Ground clearance declared | 15.0 in · 380 mm | 10.2–13.0 in · 260–330 mm | differs |
| Turning radius, braked declared | 9.4 ft · 2.85 m | — | — |
| Fuel tank declared | 113.1 qt · 107.0 L | 58.1 qt · 55 L | +95% 6670 |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
AGCO-ALLIS 6670 sources
Source
- Source: Traktorenlexikon, “AGCO-Allis 6670”
- Source: Traktorenlexikon, “AGCO-Allis 5670”
Deutz-Fahr AgroCompakt 3.70 V/F sources
Source
- Source: Traktorenlexikon, “Deutz-Fahr AgroCompact 3.70”
- Source: Traktorenlexikon, “Deutz D 6006”