AGCO-ALLIS 5680 vs VALMET 655/655-4

12 material differences

Tractor one

1991–1997

No measured PTO figure

Tractor two

1988–1989

No measured PTO figure

Which should you choose?

Read our verdict on the 5680 and the 655/655-4 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

12 material differences · 2 fields identical or within 5%, which is not counted as material

AGCO-ALLIS 5680 and VALMET 655/655-4, field by field
Field	5680	655/655-4	Gap
Engine
Engine power, claimed claimed	78.9 hp	78.9 hp	—
Engine declared	S.L.H. 1000.4 A-1	VALMET D 44 D-7	differs
Displacement declared	4.00 L	4.40 L	+10% 655/655-4
Maximum torque declared	193 lb·ft · 261 N·m	221 lb·ft · 300 N·m	+15% 655/655-4
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6 mph · 30 km/h	differs
Clutch declared	Pedal-operated dry SAME double clutch	—	—
Hydraulics & hitch
Hydraulic centre declared	Open centre	—	—
Pump flow declared	10.7 gpm · 40.5 L/min	—	—
Pressure declared	3,046 psi · 210 bar	—	—
Three-point lift at ends declared	6,790 lb · 3,080 kg	9,921 lb · 4,500 kg	+46% 655/655-4
Rear PTO speeds declared	540/1000 rpm	540 rpm	differs
Weight & dimensions
Unladen weight declared	6,669 lb · 3,025 kg	8,289 lb · 3,760 kg	+24% 655/655-4
Maximum permissible mass declared	11,464 lb · 5,200 kg	—	—
Wheelbase declared	92.9 in · 2,360 mm	93.9 in · 2,385 mm	—
Length declared	154.3 in · 3,919 mm	177.8 in · 4,515 mm	+15% 655/655-4
Width declared	76.4 in · 1,941 mm	83.9 in · 2,130 mm	+10% 655/655-4
Height declared	99.6 in · 2,530 mm	105.1 in · 2,670 mm	+6% 655/655-4
Ground clearance declared	19.7 in · 500 mm	18.7 in · 475 mm	+5% 5680
Turning radius, braked declared	9.2 ft · 2.80 m	—	—
Fuel tank declared	83.5 qt · 79.0 L	190.2 qt · 180.0 L	+128% 655/655-4

Source

Source